
















KIT INCLUDED:
①1x Exhaust Iron Gasket;
②1x Intake Iron Gasket;
③1x Paper Oil Return Gasket;
④2x O-ring Seal Washer (Silicone);
⑤2x Copper Oil Inlet Gasket;
⑥2x Coolant Composite Material Seal Washers
Specifications
Item Type: Turbocharger Kit
Condition: Brand New
Material: Iron
Color: Silver
Warranty: Five Year Warrant
Placement on Vehicle: Front
Engine: A14NET
Cooling Type: Water + Oil Cooled
Thrust bearings: 270 Degrees
Turbo Model: GT1446SLM, MGT14, MGT1446MZG, MGT1446MZGL
Compatibility :
for Buick Encore 1.4L 140HP 2013 -2021
for Chevrolet Cruze 1.4L 140HP 2011-2016
for Chevrolet Cruze Limited 1.4L 140HP 2016
for Chevrolet Sonic 1.4L 140HP 2012-2020
for Chevrolet Trax 1.4L 140HP 2010-2019
for Opel Astra J 1.4L 140HP 2009-
for Opel Meriva B 1.4L 140HP 2009-
for Holden Cruze 1.4 Turbo ECOTEC A14NET 1364ccm 103Kw 140HP
for Buick Encore:
for Buick Encore Base Sport Utility 4-Door
for Buick Encore CX Sport Utility 4-Door
for Buick Encore CXL Sport Utility 4-Door
for Buick Encore Essence Sport Utility 4-Door
for Buick Encore Preferred Sport Utility 4-Door
for Buick Encore Sport Touring Sport Utility 4-Door
for Chevrolet Cruze :
for Chevrolet Cruze L Sedan 4-Door
for Chevrolet Cruze LS Hatchback 4-Door
for Chevrolet Cruze LS Sedan 4-Door
for Chevrolet Cruze LT Hatchback 4-Door
for Chevrolet Cruze LT Sedan 4-Door
for Chevrolet Cruze Premier Hatchback 4-Door
for Chevrolet Cruze Premier Sedan 4-Door
for Chevrolet Sonic:
for Chevrolet Sonic LS Sedan 4-Door
for Chevrolet Sonic LT Hatchback 4-Door
for Chevrolet Sonic LT Sedan 4-Door
for Chevrolet Sonic Premier Hatchback 4-Door
for Chevrolet Sonic Premier Sedan 4-Door
Engine Specific:
for 1.4L 1364CC 83Cu. In. l4 GAS DOHC Turbocharged
for 1.4L 1399CC 85Cu. In. l4 GAS DOHC Turbocharged
Replace Parter number :
55565353, 8471446,781504,40-30485 SG , 14030485-101 ,
14030485-102 , 14030485-103 , 14030485-104 , 14030485-105
14030485-106 55565353 , 7815040001 , 781504-0001 ,
7815040002 , 781504-0002 , 7815040004 ,781504-0007
781504-0004 , 7815040005 781504-0005 , 7815040006 ,
781504-0006 , 7815040007 , 7815041 , 781504-1 , 7815042,
781504-2 , 7815044 , 781504-4 , 7815045 , 781504-5 , 7815045001S
781504-5001S , 7815045004 ,781504-5004 , 7815045004S ,
781504-5004S , 7815045006 ,781504-5006 , 7815045006S,
781504-5006S ,7815045007S , 781504-5007S ,
781504-5013S , 847-1446 , 860156 , E55565353, 55565354, E55565354,
55565353, 55565354, 25201063, 667-203
Features :
*Product Material
1. Turbine housing: Ductile iron qt450-10- temperature resistant up to 700℃
2. Steel turbine wheel: K418 alloy - high oxidation stability and resistance up to 900℃
3. Compressor housing: ZL104 aluminum with lightweight
4. Compressor wheel/blades: Cast aluminium blades – superior air tightness & corrosion resistance
*Product
1. High quality and size with little modification
2. Rich experience in turbo production and own factory
3. Quality assurance
4. High-Speed oil seal ring
5. Strict quality inspection
6. Precision clearance
*All necessary gaskets included for ease of installation
Technology Advantage
1. 100% balancing Test by TURBOTECHNICS VSR3
This Turbocharger you will receive has been balanced using the VSR machine technology. Through the
comprehensive and high-precision static and dynamic balance detection technology, and reliability.
2. G3-min-Flow VNT Turbo testing
The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo and verify that
it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting
before the turbocharger leaves workshop.
3. Advanced Actuator Tester/Programmer
Electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators and also
allows to modify operation range of the actuator arm, that includes changing open and close positions
of the working angle.