Carbon Fiber Style Console Gear Shift Panel Frame Trim Cover For Honda Civic 2016-2020
Features:
High Quality, easy to install
Easy Installation,automotive adhesive tape is attached.
Item Description:
Condition:100% Brand new
Material: Made Of High Quality ABS Plastic
Color: Carbon Fiber Style,as picture shows
Fitment:
For Honda Civic 10th Gen 2016-2020
Only fit for right-hand drive
Please ensure suitability carefully before purchase
Package included:
1Pcs
Installation method:
1.
Clean the location of the installation with rubbing alcohol before
proceeding. (make sure to remove any grease, wax or dust etc.)
2.
Please ensure that the product completely fits in in the door sill
before proceeding with installation. (Note: if there any questions or if
the product does not fit properly, please contact us)
3. Remove the
high strength double-sided adhesive from the back of the plate. In the
case of a relatively low temperature, heat installation location, and
plate with a hair dryer or a heat gun on low setting.
4. Carefully
place the product in desired location and press down for about 1-2
minutes, (Note: do not wash your car for 24-hours. The adhesive should
be cured after 12-hours)
5. The installation is complete.
Warm Tips:
When temperature is lower than 15 degrees, please Heat the 3M tape with a hair dryer；please Wipe up need to paste the part.
Attention:
Because
the same model car may be differently produced in different country.
Please ensure the part of your car like our picture shows, or it will not fit
Features:
High Quality, easy to install
Easy Installation,automotive adhesive tape is attached.
Item Description:
Condition:100% Brand new
Material: Made Of High Quality ABS Plastic
Color: Carbon Fiber Style,as picture shows
Fitment:
For Honda Civic 10th Gen 2016-2020
Only fit for right-hand drive
Please ensure suitability carefully before purchase
Package included:
1Pcs
Installation method:
1.
Clean the location of the installation with rubbing alcohol before
proceeding. (make sure to remove any grease, wax or dust etc.)
2.
Please ensure that the product completely fits in in the door sill
before proceeding with installation. (Note: if there any questions or if
the product does not fit properly, please contact us)
3. Remove the
high strength double-sided adhesive from the back of the plate. In the
case of a relatively low temperature, heat installation location, and
plate with a hair dryer or a heat gun on low setting.
4. Carefully
place the product in desired location and press down for about 1-2
minutes, (Note: do not wash your car for 24-hours. The adhesive should
be cured after 12-hours)
5. The installation is complete.
Warm Tips:
When temperature is lower than 15 degrees, please Heat the 3M tape with a hair dryer；please Wipe up need to paste the part.
Attention:
Because
the same model car may be differently produced in different country.
Please ensure the part of your car like our picture shows, or it will not fit
