Ancel Power Circuit Probe Tester
Model PB50 PB100 PB500 PB600
Extension Cable 13FT 20FT 20FT 10ft+20ft Extension Cable
Working Mode 4 4 7 15+
Test Voltage 12V/24V 12V/24V 12V/24V 12V/24V
AC Voltage ✔️ ✔️ ✔️ ✔️
DC Voltage ✔️ ✔️ ✔️ ✔️
Doide Test ✔️ ✔️ ✔️ ✔️
Resistance Test ✔️ ✔️ ✔️ ✔️
Duty Cycle Test     ✔️ ✔️
Frequency Test     ✔️ ✔️
Fuel Injector Testing     ✔️ ✔️
Activating Component ✔️ ✔️ ✔️ ✔️
Relay Test     ✔️ ✔️
Battery Test       ✔️
Cranking Test       ✔️
Charging Test       ✔️
Short Circuits Locating ✔️ ✔️ ✔️ ✔️
Head Lights ✔️ ✔️ ✔️ LED Lights – Able to switch
Hook       √
Display 1.77 inch TFT (160*128 DPI) TFT color display (160x128 dpi ) TFT color display (160x128 dpi ) 2.4 inch TFT (320*240 DPI )
 
About ANCEL PB50---13FT
Car Circuit Tester Inspection Tool Automotive Power Circuit Probe Kit 12V 24V Electrical System Mechanical Works Tool
With the PB50 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
 
Specifications:
Display :1.77 inch TFT (160*128 DPI)
Supply Voltage :DC: 8V~35V
Operating Temperature :-20℃ (-4℉) to 50℃ (122℉)
Storage Temperature :-40℃ (-40℉) to 65℃ (149℉)
External Power :12 or 24 V power provided via vehicle battery
Dimensions (L*W*H) ：225*45*35mm

ANCEL PB50 Product Function:
There are 4 modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
✔️DC voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.

✔️AC voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. Voltage and frequency.

✔️Resistance
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.

✔️Diode
In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reversebias.

 
Parts List:
1*User’s Manual
1*Vehicle Circuit Probe
1*Probe tip
1*Carton
About ANCEL PB100---20FT
 
Specifications:
Display :TFT color display (160x128 DPI)
Operating Temperature :0 to 60℃ ( 32 to 140℉)
Storage Temperature :-40 to 70℃ (-40 to 185℉)
External Power :12.0 or 24.0 V power provided via vehicle battery
Dimensions (L*W*H) :178*47*28mm (7*1.85*1.10in)
Net Weight :0.1Kg (0.22LB)
 
4 Working Mode:
DC voltage
While the tool in this mode, contact the probe tip to a circuit, then the 
LCD display will read the DC voltage with a resolution of 0.1 volt. 
AC voltage 
While the tool in this mode, contact the probe tip to a circuit, then the 
LCD display will read the Max. voltage, the Min. Voltage and frequency
Resistance
While the tool in this mode, contact the probe tip to a circuit, then the 
LCD display will read the resistance between the tip and auxiliary ground 
lead.
Diode
In this mode, the probe tip contact the positive terminal of the diode, 
connect the auxiliary ground lead to the negative terminal of the diode, 
the screen will display the forward voltage drop, indicates the forward 
bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reverse bias
 
Parts List:
1*User’s Manual
1* Cigarette lighter adapter
1* Battery hookup clips
1* Probe tip
1* Extension cable (20ft.)
1* Rugged blow molded case
1* Power assist cable
About ANCEL PB500---20FT
 
Specifications:
Display :TFT color display (160x128dpi)
Operating Temperature :-10 ~ +60℃ ( 14 ~ 140℉)
Storage Temperature :-20 ~ +70℃ (-4 ~ 158℉)
Dimensions (L*W*H):200mm*52mm*39mm
Net Weight :0.48Kg
Supply Voltage :8VDC ~ 30VDC
DC/ AC Voltage Test :-110V ~ 110V
Frequency :0Hz ~ 1Mhz
Duty Cycle :0.0~100.0%
Fuel Injection :Voltage: 0~180V, Time: 0~25ms
Resistance :0~1MΩ
Diode :Germanium diode, silicon diode
Rating Current :1A~8A
7 Working Mode: 
DC Voltage, 
AC Voltage, 
Frequency, 
Duty Cycle, 
Fuel Injection Circuit Detection, 
Resistance, 
Diode.
Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button to switch between Waveform Display Mode and Digital Display Mode.
 
2 Forms Display Mode
To switch Waveform Display Mode and Digital Display Mode. (In AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes)
 
Parts List:
1*Vehicle Super Probe
1* Probe Tip
1* Crochet Hook
1* Crochet Hook Extension Cable
1* Battery Clamp Cable
1* User’s Manual
1* Rugged Blow Molded Case
About ANCEL PB600--30FT  
 
Specifications:
Display :2.4 inch TFT (320*240 DPI )
Operating Temperature :-20℃(-4℉) to 50℃ (122℉)
Storage Temperature :-40℃(-40℉) to 65℃ (149℉)
Dimensions (L*W*H) :228*80*32mm
Supply Voltage :DC: 8V ~ 35V
DC/ AC Voltage Test :-110V ~ +110V (True RMS Measure)
Frequency :0Hz ~ 1Mhz
Duty Cycle :0.0%~100.0%
Fuel Injection :Voltage: 0~180V, Time: 0~25ms
Resistance :0~1MΩ
Diode :Germanium diode, silicon diode
Relay Test :Regular vehicle 4-pin or 5-pin relays
Battery Test :100-2000 CCA, 12V vehicle battery
Rating Current :1A~8 A
 

ANCEL PB600 Electrical System Circuit Tester Functions:

✔️ Diagnose 12 ~24V automotive electrical systems swiftly and accurately.
✔️ Show battery voltage reading and help user determine circuit polarity immediately after connecting the KM50 clips to the vehicle battery.
✔️ Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit, Resistance, and Diode. Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button for 3 seconds to switch between Waveform Display Mode and Digital Display Mode.
✔️ Activate electrical components and test their functions without jumper leads – by depressing the rocker switch to conduct a positive or negative battery current to the tip so as to power up electrical components.
✔️ Test bad ground contacts instantly without performing voltage drop tests.
✔️ Help user to follow and locate short circuits without using external fuses.
✔️ Test continuity with the assistance of its auxiliary ground lead.
✔️ The tool is short-circuit protected. If it becomes overloaded, Its internal circuit breaker will trip to protect the instrument from overload.
✔️ When the circuit breaker is tripped, the tool will NOT be able to conduct battery current to the tip even when the rocker switch is pressed; however, all other functions of the tool are still active, which means you can still probe a circuit and observe the voltage reading.

 
Parts List:
1*Super Probe Circuit Tester
1* Long Probe Tip
1* Short Probe Tip
1* Puncture Needle
1* Puncture Needle Extension Cable
1* Battery Clip Cable
1* Tester Extension Cable(10+20FT)
1* Relay Test Cable
1* User’s Manual
1* Tool Box
 
 
 
 
 
 
 
 
1.We accept all common forms of payment such as Credit cards,Debit card,Google Pay,PayPal ect. payment.

2.Orders will be processed within 1 business day after the payment is cleared.

3.Payment should be made within 3 days after bidding ends, or anunpaid item case will be opened to buyers.

4.Please include your special requests in eBay note if there is any.

5.Warm Tip: Payment before 11:30pm(AEST) will be shipped on the day !
For Australian/New Zealand buyers, most of our items are shipped from our own Sydney warehouse.

1. Shipping terms:AU Post Parcel or AU Post Express.

2. Shipping address supplied by eBay or Paypal is acceptable.

3. After the payment cleared, your order will be sent out within 1 business days shipping(not including holiday and weekend) .

4. Please make sure it is correct and include phone number for delivery.

5. If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!
 
 
1.We are authorize distributor, our all items are 100% original and Our devices have warranty.

2.We offer 60-day free return and exchange. If there is any problem with the product you received, please contact us and we will provide a free return label.

3.Unlimited Technical Service is available,Contact us via eBay information.

4. Please do not hesitate to leave us your positive feedback if you are happy with your shopping. if you are unsatisfied with your purchase, please do not leave us negative or neutral feedback before contacting us, we will resolve the trouble for you.
1.We are specialized dealer of On-Board Diagnostic tools and automotive electronics,Possessing multiple excellent brand distribution authorizations.as ANCEL,FOXWELL,QUICKLYNKS,LANUCH,ThINKCAR,KZYEE,FCAR,AUTOPHIX ect.

2.We are eager to be your professional parner of automobile diagnostic tool.

3.We support remote assistance by teamviewer if you have any difficulty in software installation.

4.We have a team of technicians, engineers and sales staff available Monday-Friday 9am-6pm to help with any questions or problems that you may have.
1.Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.

2.Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.

3.We will reply in 24 business hours.

4.Business time: GMT8 (9:00-18:00) from Monday to Friday.

 

 

Datacaciques