Grey Exposed Shower Mixer Twin Head Large Bar Set Bathroom Square Valve System
Installation Method: 
① 1. First, screw the elbow onto the water outlet pipe on the wall, align it with the two installation holes on the main panel, then rotate the decorative cover clockwise and screw it onto the elbow. Finally, install the water stop filter into the corner of the two installation holes. Note: Adjust the spacing between the main panel and the cormers. If alignment is not possible, adjustments can be made by winding the raw material tape a few more or fewer times 
② Install the rotating shower bar counterclockwise on the main panel 
③ Remove the fixed seat of the shower bar. There are size differences and internal threads inside the fixed seat. The large circular part hooks onto the straight rod, and the small circular part hooks onto the seven shaped rod. 【 Attention: Before installing the fixed seat, align it with the wall surface and drill a hole. Make a mark before drilling to avoid displacement after drilling. 】④ Insert the seven shaped rod directly into the straight rod, and then clamp it in place with the fixed seat 
⑤ After installing the seven rods, screw on the top nozzle 
⑥ Connect the hoses of the hand spray and spray gun to the main panel, and finally install the hand spray and spray gun.
 
Attention: This product only has the function of adjusting water temperature and does not have a constant temperature function
PushAuction