Manufacturer Part Number: PMV-107J 42607-33011 42607-33021 42607-06011

Type: TPMS Tire Pressure Monitoring System

FCC#: PAXPMV107J
Frequency: 315 MHz

PLZ NOTE :Before purchasing, please confirm whether the frame number matches the product

 

Features:

🚗【Compatible with 1】Tire pressure sensor fit for Lexus CT200h 2011-2017, ES350 2007-2018, GS300 2005 2006, GS350 2007-2011, GS430 2006 2007, GS450h 2007-2011, GS460 2008-2011, GX460 2010-2016, GX470 2004-2009, IS F 2008-2014, IS250 2006-2015, IS350 2006-2015, LFA 2012, LS460 2007-2012, LS600h 2008-2012, LX470 2005-2007, LX570 2008-2016, RX330 2006, RX350 2007-2015,8 RX400h 2006-2008, RX450h 2010-2015, SC430 2006-2010.

🚗【Compatible with 2】Tire pressure monitor system fit for Toyota 4Runner 2003-2019, Avalon 2006-2012, Camry 2006-2011, Corolla 2005-2013, FJ Cruiser 2007-2014, Highlander 2007-2013, Land Cruiser 2005-2015, Matrix 2007-2014, Prius 2005-2015, Prius Plug-In 2012-2015, Prius V 2012-2016, RAV4 2006-2012, Sequoia 2004-2007, Solara 2006-2008, Tacoma 2005-2015, Tundra 2005 2006, Venza 2009-2016, Yaris 2007-2011, Scion iQ 2012-2015, tC 2006-2016, xB 2005-2015, xD 2008-2014

🚗【Replace OEM Number】42607-02010, 42607-06011, 42607-04010, 42607-33011, 42607-0C010, 42607-0C020, 42607-0E011, 42607-30030, 42607-33021, 42607-35010, 42607-75010, 42607-AD010, 42607-AD020, 88974915, 42607-34020.

🚗【Easy to Install and Relearn】TMPS sensors kit had pre-programmed for your vehicle the same as factory, the tire sensors fit for Lexus are manufactured to OEM specification, You can DIY or to professional tire shops, just follow car manufacturers instructions to turn off and on, relearning, programming, activation and running.

🚗【Long Lasted Battery】TPMS Sensor is upgrade with an powerful automotive-grade battery for long last 5-8 years or 90000-120000 kilometers, the tire pressure sensors for Camry operating temperature range to -40℃～+125℃ ensure the safety during you driving in every conditions.

Fits the following vehicles:
🚗For Toyota:
For 2004-2016 Toyota 4Runner
For 2007-2011 Toyota Camry
For 2007-2013 Toyota Corolla
For 2007-2014 Toyota FJ Cruiser
For 2008-2013 Toyota Highlander
For 2005-2015 Toyota Land Cruiser
For 2006-2015 Toyota Prius
For 2012-2016 Toyota Prius V
For 2014-2015 Toyota Prius Plug-In
For 2006-2012 Toyota Rav4
For 2005-2006 Toyota Tundra
For 2005-2007 Toyota Sequoia
For 2007-2012 Toyota Avalon
For 2007-2013 Toyota Matrix
For 2007-2008 Toyota Solara
For 2006-2015 Toyota Tacoma
For 2009-2015 Toyota Venza
For 2009-2011 Toyota Yaris

🚗For Scion:
For 2012-2015 Scion iQ
For 2008-2015 Scion xB
For 2008-2014 Scion xD
For 2007-2016 Scion tC

🚗For Lexus:
For 2011-2016 Lexus CT200h
For 2007-2012 Lexus ES350
For 2006 Lexus GS300 (2006 please verify with your VIN)
For 2007-2011 Lexus GS350
For 2007 Lexus GS430
For 2008-2011 Lexus GS460
For 2007-2011 Lexus GS450h
For 2010-2016 Lexus GX460
For 2005-2009 Lexus GX470
For 2008-2014 Lexus IS F
For 2006-2015 Lexus IS250 (2006 please verify with your VIN)
For 2006-2015 Lexus IS350 (2006 please verify with your VIN)
For 2007-2012 Lexus LS460L
For 2008-2012 Lexus LS600hL
For 2004-2007 Lexus LX470
For 2008-2015 Lexus LX570
For 2006 Lexus RX330 (2006 please verify with your VIN)
For 2007-2015 Lexus RX350
For 2006-2008 Lexus RX400h (2006 please verify with your VIN)
For 2010-2015 Lexus RX450h
For 2007-2010 Lexus SC430

Package Includes: 4 x Tire Pressure Sensor

 

Optimized Installation Process:

1. Deflate the Tire:
   Remove the valve cap and core to fully deflate the tire.

2. Dismount the Tire:
   Secure the tire onto the tire changer and position the valve at the 1 o’clock position relative to the tire separation head. Use a tire tool to lift the bead over the mounting head and dismount the tire.

3. Remove the Sensor:
   Using a screwdriver, remove the fastening screw and sensor from the valve stem. Then loosen the nut and completely remove the valve.

4. Install the Sensor and Valve:
   Insert the valve stem through the valve hole on the rim. Secure the screw-nut with a torque of 4.0 Nm using a positioning pin for alignment. Attach the sensor body against the rim and tighten the mounting screw.

5. Mount the Tire:
   Position the tire onto the rim, ensuring the valve is oriented 180 degrees opposite the separation head. Carefully seat the tire bead over the rim edge.