•  Features:
  •  
    •  High Performance & 100% BRAND NEW
    •  Direct Replacement
    •  Fast Delivery
    •  One-year Warranty
     
  •  
  •  Specifications:
  •  
  •   OE/OEM Part Number: E9183M
  •   Drive Type:Electrical
  •   Fuel Type:Gasoline
  •   Pressure:80-90 psi
  •   Flow Rate::55-65 gph gph
  •  
  •  
  •  Package Include: 
  •  
  •  1 x Fuel Pump Module Assembly
  •  
  •  
  •  Fits these vehicles:
  •  
  • Coils-autoparts

    For Nissan For Altima 2013-2019 2.5L Petrol Sedan Electric Fuel Pump Assembly

     Features:

     

    •  High Performance & 100% BRAND NEW
    •  Direct Replacement
    •  Fast Delivery
    •  One-year Warranty

     

     

     Specifications:

     

      OE/OEM Part Number: E9183M

      Drive Type:Electrical

      Fuel Type:Gasoline

      Pressure:80-90 psi

      Flow Rate::55-65 gph gph

     

     

     Package Include: 

     

     1 x Fuel Pump Module Assembly

     

     

     Fits these vehicles:

     

    • Nissan Altima 2013-2019 L4 2.5L
    • Nissan Altima 2013-2018 V6 3.5L

     

     

     Special Note:

     

       Please enter your vehicle's year, make, model, trim and engine in the compatibility table to confirm that the part fits your vehicle.

     

     

    The fuel pump may need to be replaced if:

     

    • Hard to start up
    • Abnormal noise
    • Low fuel pressure
    • Insufficient driving force and driving with difficulty
    • Vehicles accelerate inefficiently and unstable speed?

     

     

     How to replace:

     

    • Park the vehicle on a firm, level surface and set the parking brake.

     

    • Find the fuel pump, which on most vehicles is in the fuel tank.Once located, open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. The fuel pump will hum for two to three seconds, if working properly. If no sound is made, replacing the pump may be necessary.

     

    • Relieve the fuel system pressure. Disconnect the negative battery cable.

     

    • Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump.

     

    • Support the fuel tank with a jack and a block of wood.Remove any retaining straps or bolts holding the tank to the frame. Lower the tank.

     

    • Disconnect the fuel lines and remove the fuel pump from the tank.Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump.

     

    • Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector.

     

    • Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair.

     


    Item Specifics
    Drive Type Electrical
    Fuel Type Gasoline
    Pressure 80-90 psi
    Flow Rate 55-65 gph
    Outlet Size 3/8"
    Placement on Vehicle Fuel Tank
    Inlet Type Strainer
    Inlet Count 1
    Outlet Count 1
    Internal Or External Strainer Internal
    Wiring Harness Included As show
    Voltage 12V
    Gasket or Seal Included As show
    Float Included Yes
    Condition New
    OE/OEM Part Number E9183M
    Fitment Type Direct Replacement
    Warranty 1 Year
    Black Pressure Sensor Included No
    Color As show
    Custom Bundle No
    OE Spec or Performance/Custom OE Spec
    Brand coils-autoparts
    Manufacturer Part Number CL170072S01
    Modified Item No
    Mounting Hardware Included No
    Fitment 1 For Nissan Altima 2013-2019 L4 2.5L
    Fitment 2 For Nissan Altima 2013-2018 V6 3.5L

    Payment

    We can accept  Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you. 

    Please use the eBay checkout system when paying for your order. 

    Shipping
    Product will be shipped within 2 business days after full payment is received and verified.

    Delivery time is about 2-8 business days to most of addresses.
    Returns
    All of our brand new items come with a 60-Days money-back guarantee.
    Contact Us

    Please contact us first via email or message for replacement, refund or technical problem caused by any reason. 

    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Coils-autoparts

    Shop Category
    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Nissan For Altima 2013-2019 2.5L Petrol Sedan Electric Fuel Pump Assembly

     Features:

     

    •  High Performance & 100% BRAND NEW
    •  Direct Replacement
    •  Fast Delivery
    •  One-year Warranty

     

     

     Specifications:

     

      OE/OEM Part Number: E9183M

      Drive Type:Electrical

      Fuel Type:Gasoline

      Pressure:80-90 psi

      Flow Rate::55-65 gph gph

     

     

     Package Include: 

     

     1 x Fuel Pump Module Assembly

     

     

     Fits these vehicles:

     

    • Nissan Altima 2013-2019 L4 2.5L
    • Nissan Altima 2013-2018 V6 3.5L

     

     

     Special Note:

     

       Please enter your vehicle's year, make, model, trim and engine in the compatibility table to confirm that the part fits your vehicle.

     

     

    The fuel pump may need to be replaced if:

     

    • Hard to start up
    • Abnormal noise
    • Low fuel pressure
    • Insufficient driving force and driving with difficulty
    • Vehicles accelerate inefficiently and unstable speed?

     

     

     How to replace:

     

    • Park the vehicle on a firm, level surface and set the parking brake.

     

    • Find the fuel pump, which on most vehicles is in the fuel tank.Once located, open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. The fuel pump will hum for two to three seconds, if working properly. If no sound is made, replacing the pump may be necessary.

     

    • Relieve the fuel system pressure. Disconnect the negative battery cable.

     

    • Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump.

     

    • Support the fuel tank with a jack and a block of wood.Remove any retaining straps or bolts holding the tank to the frame. Lower the tank.

     

    • Disconnect the fuel lines and remove the fuel pump from the tank.Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump.

     

    • Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector.

     

    • Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair.

     



    We can accept  Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you. 

    Please use the eBay checkout system when paying for your order. 

    Product will be shipped within 2 business days after full payment is received and verified.

    Delivery time is about 2-8 business days to most of addresses.
    All of our brand new items come with a 60-Days money-back guarantee.

    Please contact us first via email or message for replacement, refund or technical problem caused by any reason. 

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    All rights reserved.