TRMS Digital Clamp Meter AC/DC Current Multimeter Temp Volt Amp Tester 2000A AU
600A-2000A Digital Clamp Multimeter True RMS AC DC 2000V Volt Current Clamp Meter 6000 Counts Amp Ohm Meter
Description:
✨ BTMETER BT-570Y-APP This is a 6000-bit true RMS automatic AC/DC digital multimeter, powered by 1 x 9V stacked battery, with LCD display. The instrument's AC voltage and current measurement is True RMS measurement, providing more accurate results for different waveform signals.
✨ It can test DC voltage, AC and DC current, resistance, capacitance, frequency, duty cycle, temperature, diode forward voltage drop and on/off test, as well as non-contact alternating voltage (NCV) measurement with relative value measurement, data holding, max/min hold, and LCD backlight function.
✨ The device is compact, easy to use, portable, and consumes little power, making it an ideal tool for electrical measurements.
✨ 【Remote Monitoring on Mobile Phone APP VIA Bluetooth】 The current clamp meter can be connected to a mobile phone via Bluetooth and displayed on the mobile phone via an APP, which can monitor the measurement status remotely with a distance control of 10-15 metres. Save and share files in TXT and Excel format.
✨ 【AC DC Digital Clamp Multimeter】6000 display and auto-range electrical DMM meter, which can measure DC, AC/DC volts, resistance, capacitance, frequency and duty cycle. Volt Ohm Milliammeter (VOM) with automatic range selection supports backlit screen, data freeze, temperature measurement, diode test, relative value measurement, and continuity test with alarm buzzer.
✨ 【Electric Clamp Meter with Temperature Test】 Comes with extendable thermocouple probe for high temperature measurements from -20 to 1000°C. Non-contact ammeter with jaw calibre size 2.13inch (454mm), simply clamp to LIVE line or ZERO line to test AC power easily. ❗ Please separate the hot and neutral conductors, otherwise they will cancel each other out and give a zero amp value
✨ 【Industrial Clamp Meters】The device has met the IEC-1010 safety standards issued by the International Electrotechnical Commission (Double Insulation, Environmental Pollution Degree 2, Surge Category CAT II 2000V or CAT III 1000V). Built-in buzzer that beeps when the measured resistance is less than 50 Ω. Quickly check the circuit on site.
✨ 【High Accuracy Ammeter】100mA Precise resolution for 600A AC DC current, 1A for 1000A.2000A, which means it can accurately test the amperage for both high and low AC DC current. Ideal clamp gauge for solving electromechanical problems in car diagnostics, boats, cables and household appliances, etc.
Functions:
√ data lock
√ diode test
√ Automatic shut-off
√ Backlit display
√ NCV Testing
√ True RMS
√ overload frequency
√ temperature: Celsius, Fahrenheit unit
√ phone APP connection
√ data lock
√ diode test
√ Automatic shut-off
√ Backlit display
√ NCV Testing
√ True RMS
√ overload frequency
√ temperature: Celsius, Fahrenheit unit
√ phone APP connection
Specification:
- DC Voltage: 600mV, 6V, 60V, 600V, 2000V
- AC Voltage(True RMS): 6V, 60V, 600V, 2000V
- DC Current: 600A, 2000A
- AC Current(True RMS): 600A, 2000A
- Resistance: 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
- Capacitance: 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF, 60mF
- Frequency: 9.999Hz, 99.99Hz, 999.9Hz, 9.999kHz, 99.99kHz, 999.9kHz, 9.999MHz
- Duty Cycle: 0.1% to 99.9
- Temperature: -20°C to 1000°C / -4℉ to 1832℉.
- NCV: 90V~1000V AC rms
Package includes (without battery):
1. BT-570Y APP clamp meter
1. one test lead
1. English manual
1. storage bag
