1/2" to 3/8" (SHORT) Shock Absorber/Rod End Top Hat Reducing Spacers Pack x4

This product data sheet is originally written in English.



1/2" to 3/8" High Angle Misalignment Top Hat Reducers

(Pack of 10)

Part # HAT8-6(QTY:4) - 1/2" to 3/8" Top Hat Reducers (Pair)

McGill reducers are manufactured to be within excellent tolerances. These are commonly used for motorsport when using rod ends in suspension systems.

  • Ideal for applications where the bore size on the rod end needs to be reduced to take a smaller bolt.
  • Ideal for applications where more misalignment angle is required
  • Can be used as a spacer as well as a reducer.
  • Gain misalignment angle on your rod ends by using these high angle reducers. 
  • Allows free rotation of the ball as the lip slides inside the joint housing.
  • CNC precision machined.
  • Slim top hat design allows for maximum misalignment.
  • Great price & free 1st class UK P&P.
  • Perfect for all form of motorsports.

These steel 1/2" to 3/8" Rose Joint Size Reducers/Top Hat Spacers reduce the standard 1/2" hole in rose joints/reod ends to a 3/8" size. Ideal for shock absorbers.


Hole Bore : 0.375 " (3/8")   


Outside Diameter Section : 0.657 " ( 16.7 mm" )   


Height that protrudes from the rose joint/rod end when installed : 0.224" (5.7 mm).


HANDY HINT: When you have two of these installed in either side of a rose joint/rod end, the minimum bracket width to accept this configuration you need is 1.076" (27.32 mm)


When you have two of these installed in either side of a COM8 bearing the minimum bracket width to accept this configuration is 0.943" (23.96mm)

DIMS

HAT8-6

HAT8-6(THIN)

Bore

9.4mm (0.379)

9.4mm (0.379)

A

12.6mm (0.496)

10mm (0.393)

B

5.7mm (0.224)

4.3mm (0.169

C

6.5mm (0.255)

5mm (0.196)

D

16.7mm (0.657)

15.9mm (0.625)

E

3.5mm (0.137)

3.1mm (0.122)

F

12.7mm (0.5)

12.7mm (0.5)

G

1.5mm (0.059)

1.5mm (0.059)









McGill reducers are manufactured to be within excellent tolerances. These are commonly used for motorsport when using rod ends in suspension systems. Ideal for applications where the bore size on the rod end needs to be reduced to take a smaller bolt. These steel 1/2" to 3/8" Rose Joint Size Reducers/Top Hat Spacers reduce the standard 1/2" hole in rose joints/reod ends to a 3/8" size. Ideal for shock absorbers. Height that protrudes from the rose joint/rod end when installed : 0.224" (5.7 mm). HANDY HINT: When you have two of these installed in either side of a rose joint/rod end, the minimum bracket width to accept this configuration you need is 1.076" (27.32 mm) When you have two of these installed in either side of a COM8 bearing the minimum bracket width to accept this configuration i
Brand Unbranded
Manufacturer Part Number Does Not Apply
EAN Does not apply

Please note that the seller and products are located in the UK.

Items delivered to countries outside the European Union may be subject to customs processing depending on the item's declared value.


Sellers set the item's declared value and must comply with customs declaration laws.

Buyers may be subject to additional charges for customs clearance.