Specifications

Name:Car Battery Disconnect Switch Stake

Color:Green

Body Material:Zinc Alloy Copper Plated

Screw material: brass

Twist Material:Plastic

Voltage: 12V

Withstand current:400A

Size:86*36(mm)/3.39*1.42(inch)

Quantity:1PCS

Suitable for battery terminal:16~17mm

Type:Power Cutoff Switch

Package Includes

1PCS Car Battery Disconnect Switch Stake

Applicable

Suitable for most cars.

Features

l HIGH STANDARD

Brass Green Battery Switch is made of heavy duty brass alloy with durable zinc alloy terminals. Heavy duty, suitable for most batteries, 500A instantaneous current at 12V, 125A continuous current, designed for high current applications.

l GOOD PROTECTION

Anti-theft cutoff switch and starter for cars and trucks with top post batteries. Green nut can be unscrewed to prevent theft. If equipped with a 15 amp bypass fuse, it can pack the car's computer system, alarm, car locks and other components when the car switch is disconnected.

l VERSATILE

Battery disconnect switch allows you to quickly and easily disconnect your car battery for safety, maintenance or storage. Suitable for cars, boats, trucks, automobiles and moreMainly used to solve leakage and power loss problems caused by infrequently used batteries in battery cars, motorcycles and automobiles. Rated current 100A,Withstand current 400A,Connect to the negative post of the battery 15-17 mm.

l EASY TO INSTALL AND USE

Loose to turn off, tighten to conduct. Battery-powered switch just manually tighten the green knob, gently loosen the green knob to disconnect all the power (to turn off the power just turn on the switch (green) loosen 2-3 turns the whole vehicle power off, the switch is correctly tightened, you can start the vehicle)

Installation Steps

Step 1: Find the negative electrode post of the car battery, confirm that the negative electrode head diameter is 16~17mm size (conventional car battery size), remove the negative electrode collet of the original car negative electrode that needs to be replaced, and detach it from the battery cable. Check whether the electrode column is oxidized, and use a

Clean up with a battery brush (purchased separately) to remove the oxidized layer and increase the conductivity of the electrode column TAS7I2V 6OAh

Step 2: Put the battery switch on the negative pole and tighten the screws with a wrench.

Step 3: The switch is clamped on the electrode post, and the corresponding nut is strong, so that it is firmly clamped without loosening.

Step 4: above the green twist screw 4~5 circles (without taking down) the whole car power off, tighten the whole car immediately energized, safe and practical!

Warm Tips

1.The dimensions are all manually measured and there may be some errors. Due to different lighting, there is a slight color difference.Please do not purchase if you mind

2.If you has any problem, please feel free to contact us.please let us know before you send us the neutral/negative feedback that wont help to finish the issues. And I will definitely try my best to provide the best solutions which would meet your satisfactory.