Item Condition:100% Brand New
Color: As the picture shows
Material: High Quality 3D Resin
Quantity: 1 Piece Tank Pad
Features:
1.Heat transfer paste made with the highest quality polyurethane resins, from extreme clarity, softness and flexibility, resistant to UV rays, does not yellow over time.
2.Protects long-term the tank from scratches and abrasions of various kinds.
3.The resin from a value added to the adhesive, giving a three-dimensional appearance 3D in relief to the finished product, enhancing the brilliance and the chromaticism of colours.
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Without peeling, place the pad on the tank, align it and mark with paper tape.
3. Peel and apply the pad.
4. Press the air bubbles out. Use cloth if necessary.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.
Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.
Color: As the picture shows
Material: High Quality 3D Resin
Quantity: 1 Piece Tank Pad
Features:
1.Heat transfer paste made with the highest quality polyurethane resins, from extreme clarity, softness and flexibility, resistant to UV rays, does not yellow over time.
2.Protects long-term the tank from scratches and abrasions of various kinds.
3.The resin from a value added to the adhesive, giving a three-dimensional appearance 3D in relief to the finished product, enhancing the brilliance and the chromaticism of colours.
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Without peeling, place the pad on the tank, align it and mark with paper tape.
3. Peel and apply the pad.
4. Press the air bubbles out. Use cloth if necessary.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.
Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.