Function: It can accurately detect the ambient temperature and convert the temperature data into electronic signals for output. In addition to temperature, it can also measure the relative humidity in the air. Has high measurement accuracy and long-term stability.
Compatibility: Replacement For CHR07 is compatible with/For the Northland HIS06 temperature and humidity sensor. Compatible with/For environmental appliances such as humidification devices, dehumidification devices (dehumidifiers, dehumidifiers), air purifiers, mobile air conditioners, etc.
Working voltage and frequency: VPP<5.5V; 500HZ-2000HZ.
Working temperature and humidity: 0 °C-50 ℃; 20% -95% RH.
Response speed: moisture absorption less than 20 seconds; Dehumidification takes less than 30 seconds.
Service: If you encounter any problems during installation or use, please contact us promptly and we will do our best to solve the problem for you.
Electrical Parameters:
Operating Voltage: VPP <5.5V.
Operating Frequency: 500Hz - 2000Hz.
Operating Temperature Range: 0°C to 50°C.
Operating Humidity Range: 20%RH to 95%RH.
Temperature Coefficient: ≤0.5%RH/°C.
Humidity Detection Consistency: ≤±3%RH.
Response Time: Hygroscopic (absorption) <20 seconds; Desiccation (release) <30 seconds.
Water Resistance: After immersion in water for 10 minutes, natural drying and recovery, humidity change is less than 2%; after 30 minutes of immersion, natural drying and recovery, humidity change is less than 5%.
Notes:
Avoid contact with bare fingers on the sensor surface as sweat can contaminate the hygroscopic film, leading to performance drift. Use finger cots when handling the sensor.
Do not operate the product in environments with prolonged dew formation or allow it to come into prolonged contact with water.
Avoid use in environments containing the following gases: salt, sulfur dioxide, halogen gases, ammonia, alcohol, ethylene glycol ethers, aldehydes, etc.