These scalloped iron brake rotors provide effective lightweight options for sprints, late models, modifieds, and other competition applications that race in low to medium temperature ranges. Steel rotors are typically found in lighter weight open wheel cars such as sprints and modifieds. Speedways premium 11.75" x .810" drilled scalloped brake rotor weighs only 5.07 lbs.
- Scallop configuration provides greatest weight reduction on a vented straight vane iron rotor
- Scallop machining removes as much as three pounds, or nearly 33% of the rotor mass
- Vented castings provide increased cooling capacity over machined steel plate rotors
- Improved structural durability over drilled rotor designs
- Vented iron
- Inboard mounted (Sprints)
Note: Suitable for Light Dirt Racing applications. Scalloped Rotors are unsafe for street use.
Item Details
.810 x 11.758 x 7" B.C.
I buy this product again and again.
Summary: They are reliable and do the job perfectly.
Yes, I recommend this product.
Great quality rotors.
Summary: Rotors stay cooler than solid rotors I replaced
Great Product and Fast Service
Summary: Good rear rotor replacement for our 305 sprint car. Driver liked the feel and no problems.
Yes, I recommend this product.
Top Quality - Acceleration Difference was Noticeable!
Summary: These rotors fit properly. They are constructed well. The machining is excellent. The braking was smooth and consistent with no pulsation. I used them on the rear to reduce the rotating mass. Removing nearly 6 pounds from the rotating mass was noticeable. The acceleration rate with the same gear ratio set me back in the seat and made me grin. I would not mention this to my competitors because I don't want them to know this cheap and easy speed secret. Those running up front probably already know! You don't have to change your calipers or spindles from the 1.25 when you use pad spacers.
Yes, I recommend this product.
Smooth and Fast
Summary: I replaced a set of 1.25 rotors on a limited dirt late model with these .81 rotors. They stop just as well and are vibration free. The reduction in rotating mass was very noticeable in the acceleration rate with a reduction of 0.2 seconds in lap times on a 3/8 mile track.
Yes, I recommend this product.
