Product Description
· Direct replacement - This switch fits, functions and matches the appearance of the original switch for a perfect replacement every time
· Quality construction - manufactured from premium materials for a long service life
· Excellent value - original equipment quality at a lower price
· Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance
How to Install a Power Window Switch
Step 1 - Pry off Bezel
Using a flat head screwdriver you can pry up the bezel that the switch is in. You do not have to remove the door casing or the handle of the door. You simply pry gently on the power window switch bezel to get at the housing.
Step 2 - Remove from Bezel
Once the bezel comes loose, you will notice some tabs that hold it into place. Press down on the locking tab and it will come loose. Hold up the switch and bezel and look for some tabs that hold the switch to the bezel itself. Pry these with a little pressure from the screwdriver and pop the switch from the bezel.
Step 3 - Remove Rockers from Switch
Once you have the power window switch out of the bezel, remove it from the outlet. This is simply disconnecting it from the wire harness. Remove the rockers from the window switch and make sure that you know which direction they go when transferring to the new switch. Mark the front with a small piece of tape so you know where to place them on the new switch.
Step 4 - Assemble New Switch
With the rockers in hand, you can then install them onto the new switch. Take an extra minute to reassure yourself that you have them facing in the right direction. Remove the tape, if you used any, and then connect the wires back to the switch. Pop back into the bezel holder and slide the assembly back into the hole in the door. Push the assembly back in place and make sure you hear the tab snap. Test out the rockers to see if the switch moves the way that it should.
Step 5 - Test Window
Turn your car on and see if the new power window switch works.
