Why You Need S110 Pro Smoke Machine

1.Built-in Air Pump:
Built-in air pump for convenient and portable testing of various vehicle systems without the need for external air connection, ensuring high performance and cost-saving maintenance anywhere or anytime.

2.Two Woking Modes:
This device offers dual detection modes for air and smoke.  Air mode allows for leak testing before introducing smoke (place the hose in the area to be tested and observe if the small red ball on the flow meter moves to determine if there is a leak);  Smoke mode introduces smoke into vehicle system for leak detection. Keep your vehicle in optimal condition effortlessly.

3.Optimal Performance without Added Cost:
With its EVAP function, it can work efficiently under compression, freeing you from the expense of purchasing an additional regulator. The 0.5 PSI output pressure level makes it a unique and cost-effective option in the market.

4. Widely Use:
In modern cars, many check engine codes are set off by an air/vacuum leak. Our smoke machine automotive performs a variety of tests such as EVAP system test, air intake system, exhaust system, inter-cooling system, oil circuit, water lines and other pipeline systems that users can image. It effectively and accurately detects every detectable location, saving you time and money at repair shops and helping DIY mechanics pinpoint the problem, rather than just replacing parts.

5.Smoke Flow Control Valve with Flow Meter:
Easily monitor and adjust smoke output with this device. The flow meter also displays important information on internal pipe pressure, preventing damage due to high pressure and ensuring leaks are detected in low pressure scenarios. An essential tool for any detection system.             

Multi System Supported

1.EVAP System:
Since the fuel tank evaporation system is a completely closed system, any small leak may lead to failure. Fuel vapor leaking into the atmosphere can cause waste and pollution, engine shuddering and other problems.

2.Fuel Tank System: 
When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system.

3.Car Sealing Test: 
Poor air tightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof ,etc.

4.Exhaust System:
Produces noise pollution and air pollution, and the leakage area will soon produce rust and corrosion, leading to the gradual expansion of the leakage area.

5.Intake System: 
It will lead to insufficient intake pressure and difficulty to bring up the power.

6.Crankcase System: 
Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.

7.Turbo Test: 
The leakage of coolant would cause the engine to report high water temperature.

8.Vacuum pipe leaks:
Vacuum pipes are located between complex and compact power system components, making it difficult to detect the location of leaks in depth.

Dual Operating Mode Design

Air mode : First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil

Smoke mode: After the air mode determines that there is a leak, use the smoke mode to find the leak.

Built-in Air Pump

Built-in air pump for convenient and portable testing of various vehicle systems without the need for external air connection, ensuring high performance and cost-saving maintenance anywhere or anytime. 

Widely Application

S110 pro Diagnostic Leak Detector can compatible with cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, beach bikes, heavy trucks and speedboats and more. It is a universal smoke tester.

*Note:  ANCEL S110 pro with air compressor, not need other air supply.

Overheat & Anti-frost Protection

S110 pro EVAP Smoke Machine is equipped with a smart protector. When the temperature of the device exceeds eg. 120°C , the power will be intelligently activated to turn it off to ensure the safety of the operator and the device, also suitable for low temperature operation.

Note: Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating. And use about 5 mins machine will auto stop work, when temperature down, then will start work.

How to use it?

Step 1: Mount the hook to S110 pro smoke leak detector, plug the power cord into the socket.

Step 2: Fill (15-20ml pink Baby Oil) smoke oil into the S110 pro smoke machine, from refill port on the top.

Step 3: Connect 12V vehicle power, turn the Flow Dial anti-clockwise to open the air flow, switch on the power, then S110 pro smoke machine automotive will start to generate smoke.

Step 4:In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

Warm Tips

●The oil level shall not exceed the level gauge and please do not exceed 15 ml when adding new oil later.

●Please do not to operate the S110 pro EVAP system smoke machine continuously for more than 8 minutes.

●Before refilling new oil, please pour out the remaining oil in the detector, drain the old oil and then add new oil.

●Use baby oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.

●To ensure the safety of people and vehicles, the engine does not need to be ignited during use.

●If your smoke machine's fumes are discharged from the top of the machine: please turn on the gas switch first, then power on

Package List:

1* S110 pro Smoke Machine
1* EVAP Service Port Adapter
1* Smoke Delivery Hose
1* EVAP Removal Tool
1* Power Cord Clamp
1* Hook
1* Funnel