All miniatures are 3D printed with a gray ABS-Like resin (flexible to help reduce breaks) using a 16k resolution printer and are supplied unassembled and unpainted. Some modeling experience is suggested; you may need to file some areas where supports were attached and will need glue to attach pieces.
- Vehicles are printed hollowed out. Whenever possible, holes are hidden underneath the turret or behind the tracks. Otherwise holes will be printed underneath the hull.
- Tanks are printed WITHOUT the crew and hatches closed - Reach out if you want an open hatch with crew.
- Miniatures are UNPAINTED; Image shows painted miniatures for display only
- Just Some Miniatures Pictures are included to show the initial design.
Shipping
- Each item adds $1 to the shipping cost; max $15.
Preparation
- Major supports are REMOVED; there may be small supports still attached, which may require small tweezers to remove.
- Supports may still be attached to provide additional strength during shipping if a piece is prone to breaking.
Clean Up
- Models should arrive ready to be primed, as they are pre-cleaned in isopropyl alcohol (IPA) and cured for a couple minutes post processing.
- However, it is not unusual for a model to arrive slightly tacky (uncured resin). If this is the case, 1) lightly scrub the models in IPA, 2) let dry, 3) place models in the sun for a couple minutes to complete the curing.
*Caution: there are lots of small, fragile pieces, so this is not recommended for young children.
Have an issue with the order? Please reach out, and we will work to resolve the issue.
We are authorized to sell these RKX physical products.