【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger.
【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe.
【Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool.
【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools.
【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and tangent chart, this pipefitter tool can help you make straight lines around pipes. When judging the horizontal state, the bubble of the green liquid needs to be in the middle of two lines on the protractor. 【Note:】When determining the angle, the bubble of the green liquid should be in the horizontal position whatever the angle is.

Product description

Bubble In The Middle.

Built-in adjustable “DIAL BUBBLE PROTRACTOR" (DSL)
For Safer Hammering.

Safer hammering. Tap the safety head on the center punch with a hammer to mark your set position.
Loosen/tighten the hexagonal nut.

Use the included hex key allen wrench to loosen/tighten the hexagonal nut.
Mark the Location Point.

Flexible Marking Column mark the location point on the pipe.

TO MEASURE PIPES & TANKS 5" IN DIAMETER OR LARGER

Product description

Bubble In The Middle.

For Safer Hammering.

Loosen/tighten the hexagonal nut.

Mark the Location Point.

TO MEASURE PIPES & TANKS 5" IN DIAMETER OR LARGER