115225FS Fast Strike Power Trim Tilt Seals Kit for Yamaha Outboard Motor & Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm for Yamaha Suzuki Johnson Evinrude Honda
Trim/Tilt Pin Wrench MT0006
Fits for Trim/Tilt Units on Yamaha, Honda, Evinrude, Johnson, and Suzuki Outboards. Remove the trim/tilt caps, trim seals on hydraulic cylinders without damaging. (32mm x 4mm). Same as Yamaha OEM Tool: YB-06175-1A.
115225FS Seal Kit
Seal kit for Yamaha Boat Power Trim Tilt Units 1997 or Newer Fast Strike Trim Tilt Unit 115HP - 250HP. Also fits for Suzuki, Honda, Tohatsu, Nissan, All Showa Style 3 ram integrated trim tilt system. Does not fit Yamaha 200-300hp 4 Stroke.
Benefits
Trim tilt kit that contains necessary seals for a hydraulic reseal. The MT0006 features 1/2" socket drive - 46m-lb torque rating. 200 ft-lb min pin strength. Comes with 6 removable pins（4mm）.
Built To Last
Seal kit is made of odorless environment friendly rubber material, resisting salt water, impact and tear. The MT0006 is made of hardened stainless steel coated with silver finish for extended longevity and durability.
100% Satisfaction Guarantee
If you're not 100% satisfied with this kit, simply return it for a full refund in 60 days, guarantee with 1 years’ warranty.
Trim/Tilt Pin Wrench MT0006:
Application:
Trim Caps on ALL SHOWA manufactured Trim/Tilt Units
Trim Caps on Yamaha F115-F150
Trim caps on ALL Yamaha I4 2.8L (F175-F200)
Trim Caps Yamaha 2-Strokes (115-225hp)
Trim Caps on ALL Yamaha VMAX
Trim Caps All Suzuki, Honda, Johnson, Evinrude
A Must Have Tool:
This tool is required to remove the nut on the trim and tilt cylinder.
Easily rebuild a leaked device on outboard engine, hydraulic trim and tilt unit.
Features:
Direct replace OEM# YB-06175-1A
Replaceable Hardened Stainless Steel Pins with Gripping Teeth for added security
1/2" Socket Drive - 46m-lb Torque Rating.
200 ft-lb MIN Pin Strength
115225FS Seal Kit:
Application Reference:
For Yamaha 115HP, 150HP, 175HP, 200HP, 225HP (20" Shaft), 250HP (20" Shaft).
Years 1997 to Current
Fast Strike models
Fits 60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D,
63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00,
64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More
Also fits Suzuki, Honda, Tohatsu, Nissan, All Showa Style 3 ram integrated trim tilt system. Does not fit Yamaha 200-300hp 4 Stroke.
Why choose our seal kit?
1. In a freshwater application on a bass boat you will see the bolts have stretched and losses their torque form the hydraulic pressure in between the valve body and manifold.
2. In a salt water application salt and corrosion builds between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.
Replacement:
- 115225FS Seal kit replaces for part number 115225FS.
- MT0006 Wrench equivalent for Yamaha factory tools YB-06175-1A, YB-06548
Function:
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
NOTE:
This MT0006 Outboard Trim Tilt Wrench does not fit for Yamaha 200-300hp 4 Stroke, 1988 Johnson evinrude 200hp.
Package
115225FS Seal Kit +Trim/Tilt Pin Wrench MT0006
Product Description
Premium Material:
Made from top quality Steel & Rubber
Prevent from rust and corrosion
Ensures long term reliable service
Package Includes:
4 x S-4mm Replaceable Pins
4 x S-4.5mm Replaceable Pins
1 × 32mm Pin Wrench MT0006
26 x Fast Strike Power Trim Tilt Seals 115225FS
Wide Application:
Fits for models 60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More;
Fits for 1997 to current Yamaha Boat Power Trim Tilt Units 115HP, 150HP, 175HP, 200HP, 225HP (20" Shaft), 250HP (20" Shaft) and More;
Also fits for Suzuki, Honda, Tohatsu Nissan, All Showa Style 3 Ram integrated trim tilt system.
Notes: DOES NOT fit for Yamaha 200-300hp 4 Stroke.
Usage:
In freshwater application on a bass boat you will see the bolts have stretched and lost their torque from the hydraulic pressure in between the valve body and manifold.
In salt water application, salt and corrosion build between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.
Minimum Pin Strength: 180 ft-lb
Replacement Pins: MT0005 - S-4mm/4.5mm
Direct replacement for Yamaha factory tool: YB-06175-1A and YB-06548
Powerful Functions:
Replaceable Pins are available. All pins can be engaged caps and prevent breakage.
Specially designed to easily & properly to remove and install the trim caps without damage, helps you effectively rebuild the leaked device on outboard engine, hydraulic trim and tilt unit.
Easy Operation --- The pin wrench features a 1/2” Square Drive to fit a 1/2 inches torque wrench or breaker bar for easy use. Simply makes both pin line up with the cap holes and insert, then apply pressure on the wrench to remove cap using a 1/2" breaker bar. (Note: Package DOES NOT include torque wrench or breaker bar.)
Wide Application:
Fits for all SHOWA-manufactured Trim/Tilt Units
Trim Caps for Yamaha F115-F150
Trim Caps for Yamaha l4 2.8L (F175-F200)
Trim Caps for Yamaha 2-Strokes (115-225hp)
Trim Caps for Yamaha VMAX
Trim Caps for Suzuki Honda Johnson Evinrude
