Specification:
Plug Type:High + Low Beam
Power(per set): 120W@high beam,120W@ low beam
LED Quantity(each bulb): AJHGFOW 2pcs*chips
Luminous Flux: 20000LM@high beam,20000LM@low beam
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Usage: LED Headlights
Feature:
High-Low Beam LED headlight conversion kit
chip(USA) light source,2 luminous faces no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
LED white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
5-MINUTE INSTALLATION: All-in-one design, bulid-in driver for taking up less space in housing, no bulky external driver, no extended bulb base, no more modification on housing or cover. Real plug and play, smoothly fits into vehicle's housing and factory sockets even with limited space in original housing.
LONG LIFESPAN: The efficient cooling system with integral aerospace aluminum body, unique hollow engraved heat sink design and smart IC ensures a longer life for the LED conversion kit.
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Package Included:
2x 9005/HB3 LED Headlight Bulbs
2x 9006/HB4 LED Headlight Bulbs
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. LED lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . LED working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than LED lamps, significantly lower than the LED lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The LED bulbs in the same color to clear , about 6000K-6500K.
7.Certification: IP68 Waterproof, CE, RoHS
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Plug Type:High + Low Beam
Power(per set): 120W@high beam,120W@ low beam
LED Quantity(each bulb): AJHGFOW 2pcs*chips
Luminous Flux: 20000LM@high beam,20000LM@low beam
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Usage: LED Headlights
Feature:
High-Low Beam LED headlight conversion kit
chip(USA) light source,2 luminous faces no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
LED white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
5-MINUTE INSTALLATION: All-in-one design, bulid-in driver for taking up less space in housing, no bulky external driver, no extended bulb base, no more modification on housing or cover. Real plug and play, smoothly fits into vehicle's housing and factory sockets even with limited space in original housing.
LONG LIFESPAN: The efficient cooling system with integral aerospace aluminum body, unique hollow engraved heat sink design and smart IC ensures a longer life for the LED conversion kit.
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Package Included:
2x 9005/HB3 LED Headlight Bulbs
2x 9006/HB4 LED Headlight Bulbs
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. LED lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . LED working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than LED lamps, significantly lower than the LED lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The LED bulbs in the same color to clear , about 6000K-6500K.
7.Certification: IP68 Waterproof, CE, RoHS
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.