Hantek 1008C Automotive Diagnostic PC Oscilloscope USB2.0 Program Generator 8CH
Software support: Windows 7, Windows 8，Windows 10
Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
Vehicle Testing:
- First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition.
- Ignition: primary and secondary.
- Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position.
- Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus.
- Performer: Petrol/Diesel.
- Starter and charging circuits.
Oscilloscope:
- 8 channels oscilloscope, 2.4MSa/s real time sampling rate.
- 12 bits vertical resolution, spectrum analysis function.
Programmable
Generator:
- 8 channels programmable generator.
- Can analog signals of crankshaft, camshaft etc.
Others:
- USB 2.0 interface plug and play, and no need extra power supply;
- More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
- Software support: Windows 7, Windows 8，Windows 10
Specifications:
|
Oscilloscope Mode |
|
|
Vertical System |
|
|
Analog Channel |
8 |
|
Input Impedance |
Resistance: 1MΩ |
|
Input Sensitivity |
10mV/div to 5V/div |
|
Input Coupling |
DC |
|
Resolution |
12 bits |
|
Horizontal System |
|
|
Memory Depth |
4K |
|
Max. Input |
400V (DC+AC Peak) |
|
Real-Time Sampling Rate |
2.4MSa/s |
|
Time Base Range |
1ns/div to 20000s/div(1-2-5sequences) |
|
Time Base Precision |
±50ppm |
|
Trigger System |
|
|
Time Base Range |
1ns/div to 20000s/div(1-2-5sequences) |
|
Time Base Precision |
±50ppm |
|
Trigger Source |
CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 |
|
Trigger Mode |
Edge |
|
X-Y Mode |
|
|
X-Axis Input |
CH1 |
|
Y-Axis Input |
CH2 |
|
Cursors and Measurement |
|
|
Voltage Measurement |
Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot |
|
Time Measurement |
Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
|
Cursors Measurement |
Horizontal ,Vertical, Track, Auto Measure Modes |
|
Waveform Signal Process |
+,- , x,÷, FFT, Invert |
|
Voltage Range |
10mV to 5V/div @ x 1 probe |
|
Current Range |
100mA to50.0A/div @
CC65(20A) |
|
FFT |
Rectangular, Hanning, Hamming, Blackman Window |
|
Math |
Addition, subtraction, multiplication, division |
|
Programmable Generator |
|
|
Channel |
8 |
|
Output Level |
LVTTL |
|
Frequency Range |
0-250kHz |
|
Interface |
USB 2.0 |
|
Power |
No need extra power supply |
|
General |
|
|
Size |
185 * 150 * 27mm / 7.3 * 5.9 * 1.06in |
|
Weight |
319g / 11.28oz |
|
Package Size |
23 * 17 * 7.5cm / 9.05 * 6.7 * 2.95in (L * W * H) |
|
Package Weight |
915g / 32.29oz |
Package List:
1
* 1008C DAQ oscilloscope
8 * Crocodile probes/cable
1 * secondary ignition probe HT-25
1 * USB Cable
1 * CD
