SB-3WSIT (110 v)

          Ozone Generator for Outdoor Use. Ozone machine for continuous use 27/7

🌟 Powerful, compact, and designed for safe, intermittent use 24/7 The Silver Bar SB-3WSIT is a high-performance ozone generator, designed to provide automatic ozone injection in optimized cycles. With a capacity of 1200 mg/h, it is ideal for purifying water in spas, hot tubs, tanks, aquariums, hydroponic systems, and other industrial treatment applications. Its smart internal timer activates the device for 50 minutes, followed by an automatic 30-minute break to protect it from overheating. This cycle repeats continuously, allowing it to operate 24/7 without user intervention. It also features a visible, regenerable, and easy-to-maintain silica gel air drying system that significantly improves the quality of the ozone generated.

✅ User Benefits ✔️ 24/7 operation in automatic cycles (50 min ON / 30 min OFF). If you require a different regimen, it can be customized at the factory when placing your order. ✔️ High-purity ozone generation thanks to the silica gel air dryer ✔️ Flexible installation: wall or venturi (more efficient than an air stone) ✔️ Waterproof design (not submersible) ✔️ Low power consumption (10 W) and 3 L/min internal air pump 📦 Package Contents

Silver Bar SB-1100WP Ozone Generator (1100 mg/h) Silicone tubing, Air stone, Welcome document with: Customer Thank You Operating Opinion Contact Sheet Equipment technical data

• ⚙️ Technical specifications

Features Details Brand Silver Bar Model SB-1100WP Ozone production 1200 mg/h Operating hours 50 min ON / OFF 30 min OFF (automatic) Can be customized at the factory. Contact the seller. Generation Type: Corona System Power Consumption: 10 W Internal Air Pump: 3 L/min Operating Voltage: 110v

Dimensions: 6 x 4 x 2 inches

Weight: 1.8 lb Color: Black Protection: Water resistant (Not submersible) LED Indicators: Power On/Active Injection Drying System: Regenerable silica gel (1.8 oz) Off System and Overheat Protection, which extends its lifespan. Recommended Installation: Preferably wall-mounted, above water level. Do not submerge, as the air inlet remains open. Can be used with the included diffuser stone or connected to a venturi tube for greater efficiency.

• 🔁 Silica Gel Regeneration When the gel changes from blue to orange, it must be regenerated to maintain high-quality ozone. Regeneration Instructions: Carefully remove the silica gel from the tube. Place it in an oven-safe container. Oven bakes at 120°C (250°F) for 1 to 2 hours until it returns to its blue color. Let it cool before replacing it. 📊 Estimated Water Purification Capacity 🕒 Based on its operating regime (70 min ON / 30 min OFF), the equipment injects ozone approximately 70% of the total time.

Pour 200 gallons within the first hour of operation. 💡 Approximate values ​​for applications with moderate ozone concentrations (0.25–0.5 ppm). For greater disinfection, double the exposure time.

• Suggested Applications Multipurpose for home and industrial applications Spas and hot tubs Small pools and storage tanks Aquariums and ornamental ponds Hydroponic and irrigation systems

Instructions for Use and Replacement of Silica Gel

Dear Customer:

Please note that the clear acrylic tube contains blue silica gel, which turns pink when saturated with moisture. To regenerate the silica gel, follow these instructions:

Oven: Bake the silica gel for 0.5 to 2 hours at 250 degrees Fahrenheit (approximately 120 degrees Celsius).

Microwave: You can also regenerate the silica gel in the microwave for 10 minutes on the DEFROST function.

Additionally, we provide a replacement with 2 ounces of fresh silica gel for your convenience. To replace it, follow these steps:

Remove the tube from the unit by disconnecting the silicone tube.

Remove the bottom rubber plug, being careful not to spill the silica gel beads.

If you have any questions or need further assistance, please do not hesitate to contact us.

Note: In hot cities like Miami, protect your unit from direct sunlight.

Made to Order

This unit is carefully manufactured upon receipt of your order. The manufacturing process takes app