Features

【High-strength aluminum construction 】3X more durable than cast iron competitors, corrosion-resistant & vibration-tested – No cracking, breaking, or leaking, ensures long-lasting performance even under extreme conditions.
【LOW NOISE & FUEL CONSUMPTION】The KAC compressor works steady and efficient under a low noise condition, provide you with a chill nice and cold ride. Under a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly
【STRONG COOLING FUNCTION】The auto ac compressor can provide sufficient pressure, which increases power force and decreases engine load. It greatly improves the cooling function. Features as high and stable efficiency, safety, and reliability. No worry of leaking. Adjust automatically.
【FULLY TESTED & EASY INSTALLATION】This A/C compressor undergoes a series of rigorous quality validations including thermal cycle endurance testing, material stress analysis, and corrosion resistance evaluations prior to shipment. Every unit is certified through industry-standard validation protocols to guarantee automotive-grade reliability and sustained peak performance throughout its service life.
【Customer Support】KAC has long been committed to the development and production of automotive parts, and any parts produced are 100% matched with the original car. Please double-check your car's model and year before purchasing, and feel free to contact us with any questions or concerns. We're here to help.

Fitment For

Package Included

1x A/C Compressor - 59157

Note

Please make sure the installation site is clean. Or it will cause operating obstruction, making the compressor's temperature very high, and the belt on the clutch may melt. But you need to add the refrigerant. Please add it to 70-80%. Try not to fill it up. There may be noise if the refrigerant is added too much.

Installation

Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.

1.Remove compressor:
Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped).
2.receiver drier or accumulator, orifice tube or expansion valve.
3.Disconnect the negative battery cable.
4.Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the  evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.  
5.Drain all the oil from the new compressor ,if you compressor has a drain plug you will need to open it up and drain what oil is in there too.
6.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
7.Install new receiver drier or accumulator and new orifice tube or expansion valve.
8.Evacuate the A/C system for a minimum of one hour.
9.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
10.Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct.
11.If the A/C system is functioning ,you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature.