Description
PW07 Ultra-low Noise 200W High Power Linear Regulated Power Supply Dual-channel Outputs
Disclaimer of Product Use Risks:
-
Users should follow the operating instructions in the product manual
when using electronic products and pay attention to safety precautions
during use. Our store is not responsible for any personal injury, direct
or indirect property damage, or other damages caused by the use of this
product.
Legal Liability Disclaimer:
- Our store is
not responsible for any illegal activities arising from the use of this
product. Users should comply with local laws and regulations when using
electronic products and bear any legal responsibilities arising
therefrom.
Description:
- Newly launched PW07
high-power linear stabilized power supply, with ultra-low ripple and
ultra-high current output, specially designed for high demand and high
current power supply devices such as laptops, NUC, host for Daphile and
routers with a maximum customizable DC port 10A current output (and
adjustable voltage) and USB port 5V4A output.
Precaution:
- Before connecting the back-end device, it is best to power on and check if the displayed voltage is normal.
- Do not short-circuit the output terminal while powered on, as it may cause significant sparks.
-
The ADJ hole behind is used to fine tune the DC output voltage. The
voltage can be lowered, but attention should be paid to heat generation.
Increasing the nominal voltage by about 1V will automatically
disconnect the output (overvoltage protection).
- It is normal for
the casing to heat up significantly under high current output
conditions. Please pay attention to heat dissipation and do not use in
enclosed spaces.
Features:
- High power, high current, low ripple characteristics, multiple options for DC port output voltage.
- The DC port can output a maximum current of 10A, and the USB port can output a maximum current of 5V 4A.
- Stable voltage, extremely low output ripple, and full load output ripple less than 100uV.
-
High precision voltage reference source with extremely low temperature
drift, high precision (0.05%), extremely low noise (1.06uVRMS), and
temperature coefficient of 3ppm is used to ensure long-term operational
stability.
- Using high-speed rail to rail low-noise operational
amplifiers for error amplification sampling to drive 25A high current
transistors, with large margin and high long-term stability for high
current operation.
- The thermal conductive silicone grease uses
19.8W of high thermal conductivity, and the insulation sheet uses
expensive aluminum nitride. The main advantage is its extremely high
thermal conductivity of 170W and fast heat dissipation.
- The
rectifier uses an ideal diode bridge with high efficiency, low internal
resistance, low heat generation, and no switching noise like ordinary
diodes. The disadvantage is high cost (only used for DC ports).
- The power input end has added a mains DC isolation circuit (capable of isolating 0.7V).
-
Two independent rectification and voltage stabilization circuits, not
grounded, equipped with large capacity filtering capacitors.
- Two
independent overvoltage protection circuits, automatically disconnect
the output when the nominal value exceeds 1V (in order to reduce losses,
MOS transistors with high current are used, which is costly)
- Gold plated DC output interface, for Foxconn USB interface, stable and reliable.
-
Equipped with a 220W high-power transformer as standard, ensuring
sufficient output current of 6A (the actual DC port can output 8A
without any problem)
Specification:
- DC port output voltage: 5/9/12/15/19V (optional)
- DC port output current: default maximum 6A for one port
- USB output voltage: fixed 5V
- USB output current: default maximum output 2A for one port
- Output ripple voltage: < 100uV at full load
- DC port output internal resistance: < 10mohms
- USB port output internal resistance: < 15mohms
- DC port specification: 2 x DC5.5-2.1, 1 x GX16 2-core aviation socket
- USB port specification: 1 x USB A port, 1 x Type-C port
- Product size: 302 x 190 x 75mm
- Packaging weight: about 6kg
Package Included:
- 1 x Linear Power Supply
- 1 x Power Cable
- 1 x DC Cable
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2.
For remote regions of DHL/FedEx..., extra shipping costs might be
charged. Usually it costs about 30USD-50USD. We will contact you if
shipping company informed us your address belongs to remote area. Thanks
for your understanding.
Return Terms
If
you receive the item that not satisfied or defective, please do not
open case and kindly notify us within 30 days. We will guide you the
returning process for replacement or refund.
Custom Duties & Taxes
1.
It is buyer's responsibility to cover the import duties, taxes.We do
not charge any taxes and fees, and the possible taxes and fees will be
collected by the platform or by third parties such as customs and
carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1.
Please kindly leave us a positive feedback and 5 star DSR if you
satisfied with our product and service. Please feel free to contact us
firstly if you have any problem with your order, we are responsible and
credible seller and will solve the issue it for you asap.
2. If you
are dissatisfied for any reason, please don't be quick to leave us
neutral or negative feedback. We work hard to make sure EVERY CUSTOMER
100% SATISFIED and resolve any problem for you and always leave positive
feedback to all our customers.
On Jul 1, 2025 at 23:47:28 PDT, seller added the following information: