Description:

This garage door remote control is a replacement rather than an original accessory. We recommend you refer to the list below for device compatibility before purchasing.

Compatible with 868MHz blue handheld transmitters only: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS Compatible with for Hörmann garage door openers: for SupraMatic, for ProMatic, for ProMatic Akku, for RollMatic, for RotaMatic, for VersaMatic, for LineaMatic

Two programming methods: Copying the code from the original remote control/programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), it will not work.

Supports 2 garage doors ,control up to 2 garage door openers or gates + rolling code technology to protect the access and connection of your home.Unique design and durability and well-made materials such as metal reinforced key fob frame, more solid and beautiful than a bulky 100% plastic remote control.

2 Buttons Mini Bisecur BS Handheld Transmitter, With the metal protective cover to prevent the button from accidentally pressing. And it is small enough to fit well on a keychain, bag or backpack, easy to carry.

Note: Built-in scrolling codes (blue LEDs)!

If your original remote control uses fixed codes (red LEDs), it will not work.

Compatible models

For HORMANN HS1-868-BS

For HORMANN HS4-868-BS

For HORMANN HS5-868-BS

For HORMANN HSE1-868-BS

For HORMANN HSE2-868-BS

For HORMANN HSE4-868-BS

For HORMANN HSP4-868-BS

For HORMANN HSD2-868-BS

For HORMANN HSS4-868-BS

How to program?

1) Press and hold the button of the new remote control, you want to save the code of the original remote control, press and hold it, press another button three times until the red LED light is on for 10 seconds and release all buttons.

2) Place the original remote control as close as possible to the left side of the new remote control.

3) Press the button on the original remote control. You must copy the code until the LED flashes red and blue alternately. Check whether the LED on the new remote control flashes blue. If not, try to get as close to the original remote control as possible.

4) If the blue light on the new remote control flashes quickly, the learning process is complete. Release all buttons.

5) Please follow the same procedure for the remaining buttons.

Reset method:

Each button on the remote control is assigned to a new radio code using the following steps.

(1) Remove the battery for 10 seconds.

(2) Press and hold a button on the remote control.

(3) Insert the battery. The LED flashes blue slowly for 4 seconds.

Product List:

1/2/3/4 *Garage door remote control

Notice:

1.The actual color of the project may be slightly different from the picture displayed on the website due to many factors such as the brightness of the display and the brightness of the light.   I sincerely hope you can understand.

2.The size is manually measured, and there may be an error of 0-2cm, which is a normal phenomenon.