Description
DM-J8009P-2EC (DM8009P) 24V 20Nm Joint Motor MIT-Driven Brushless Servo Motor with Two Encoders
Advantages:
* Rated Torque: 20Nm
* Cross Roller Bearing
* Single-Turn Absolute Position Output Shaft
* Built-In Driver
* Three Operation Modes
* Built-In Gearbox
* Dual Built-In Encoders
Features:
* Dual-encoder system, with single-turn absolute position output shaft, ensures no loss of absolute position during power outages
* Integrated motor and drive design, and compact structure with high level of integration
* Supports PC-based visual debugging and firmware upgrades
* Capable of real-time feedback via CAN bus, including motor speed, position, torque, and temperature data
* Equipped with dual-temperature protection for enhanced safety
* Supports trapezoidal acceleration/deceleration in position control mode
Specifications:
Motor Parameters:
* Rated Voltage: 24V (supports 24-48V)
* Rated Current: 20A
* Peak Current: 50A
* Rated Torque: 20Nm
* Peak Torque: 40Nm
* Rated Speed: 100rpm
* No-Load Max Speed: 24V: 160rpm; 48V: 320rpm
Motor Characteristics:
* Gear Ratio: 9:1
* Pole Pairs: 21
* Phase Inductance: 80μH
* Phase Resistance: 0.145Ω
Structure & Weight:
* Outer Diameter: 98mm
* Height: 61.7mm
* Weight: About 930g
Encoder:
* Encoder Resolution: 14-bit
* Number of Encoders: 2
* Encoder Type: Magnetic (single-turn, absolute position output per shaft rotation)
Communication:
* Control Interface: CAN at 1Mbps
* Parameter Adjustment Interface: UART at 921600bps
Control Modes:
* MIT mode, speed mode and position mode
Protection:
* Driver Over-temperature Protection: Protection temperature set at 120°C. When overheating occurs, the motor will exit "Enable Mode".
* Motor Over-temperature Protection: Set according to use requirements, recommended not to exceed 100°C. When overheating occurs, the motor will exit "Enable Mode".
* Motor Over-voltage Protection: Set according to use requirements, recommended not to exceed 52V. When over-voltage occurs, the motor will exit "Enable Mode".
* Communication Loss Protection: If no CAN command is received within the set period, the motor will automatically exit "Enable Mode".
* Motor Over-current Protection: Set according to use requirements, recommended not to exceed 39A. When over-current occurs, the motor will exit "Enable Mode".
* Motor Under-voltage Protection: If the power supply voltage is below the set value, the motor will exit "Enable Mode". Power supply voltage should not be less than 15V.
Packing List:
* Motor (with driver) ×1
* Power cable: XT30 male-to-female power cable (length: 200mm) ×1
* CAN communication terminal: GH1.25 connector cable - 2pin (length: 300mm) ×1
* Debugging serial signal cable: GH1.25 connector cable - 3pin (length: 300mm) ×1
* USB-to-CAN Module ×1,optional
Packaging Details:
* Weight: 1.2kg
Advantages:
* Rated Torque: 20Nm
* Cross Roller Bearing
* Single-Turn Absolute Position Output Shaft
* Built-In Driver
* Three Operation Modes
* Built-In Gearbox
* Dual Built-In Encoders
Features:
* Dual-encoder system, with single-turn absolute position output shaft, ensures no loss of absolute position during power outages
* Integrated motor and drive design, and compact structure with high level of integration
* Supports PC-based visual debugging and firmware upgrades
* Capable of real-time feedback via CAN bus, including motor speed, position, torque, and temperature data
* Equipped with dual-temperature protection for enhanced safety
* Supports trapezoidal acceleration/deceleration in position control mode
Specifications:
Motor Parameters:
* Rated Voltage: 24V (supports 24-48V)
* Rated Current: 20A
* Peak Current: 50A
* Rated Torque: 20Nm
* Peak Torque: 40Nm
* Rated Speed: 100rpm
* No-Load Max Speed: 24V: 160rpm; 48V: 320rpm
Motor Characteristics:
* Gear Ratio: 9:1
* Pole Pairs: 21
* Phase Inductance: 80μH
* Phase Resistance: 0.145Ω
Structure & Weight:
* Outer Diameter: 98mm
* Height: 61.7mm
* Weight: About 930g
Encoder:
* Encoder Resolution: 14-bit
* Number of Encoders: 2
* Encoder Type: Magnetic (single-turn, absolute position output per shaft rotation)
Communication:
* Control Interface: CAN at 1Mbps
* Parameter Adjustment Interface: UART at 921600bps
Control Modes:
* MIT mode, speed mode and position mode
Protection:
* Driver Over-temperature Protection: Protection temperature set at 120°C. When overheating occurs, the motor will exit "Enable Mode".
* Motor Over-temperature Protection: Set according to use requirements, recommended not to exceed 100°C. When overheating occurs, the motor will exit "Enable Mode".
* Motor Over-voltage Protection: Set according to use requirements, recommended not to exceed 52V. When over-voltage occurs, the motor will exit "Enable Mode".
* Communication Loss Protection: If no CAN command is received within the set period, the motor will automatically exit "Enable Mode".
* Motor Over-current Protection: Set according to use requirements, recommended not to exceed 39A. When over-current occurs, the motor will exit "Enable Mode".
* Motor Under-voltage Protection: If the power supply voltage is below the set value, the motor will exit "Enable Mode". Power supply voltage should not be less than 15V.
Packing List:
* Motor (with driver) ×1
* Power cable: XT30 male-to-female power cable (length: 200mm) ×1
* CAN communication terminal: GH1.25 connector cable - 2pin (length: 300mm) ×1
* Debugging serial signal cable: GH1.25 connector cable - 3pin (length: 300mm) ×1
* USB-to-CAN Module ×1,optional
Packaging Details:
* Weight: 1.2kg
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If
you receive the item that not satisfied or defective, please do not
open case and kindly notify us within 30 days. We will guide you the
returning process for replacement or refund.
Custom Duties & Taxes
1.
It is buyer's responsibility to cover the import duties, taxes.We do
not charge any taxes and fees, and the possible taxes and fees will be
collected by the platform or by third parties such as customs and
carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1.
Please kindly leave us a positive feedback and 5 star DSR if you
satisfied with our product and service. Please feel free to contact us
firstly if you have any problem with your order, we are responsible and
credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.