Battery Split Charge Relay Kit Ready Made Leads 12V 140A VSR Sense Camper Van UK
Applications:
This type of kit is suitable for Camper Vans, Motor homes, 4x4s, Day Vans, Mobile workshops,Cars or Boats.
Voltage sense systems are especially suited for modern vehicles with canbus controlled wiring as this type of kit does not need an ignition feed or any additional wiring and are very simple kit to install, all you need to do is to connect your starter battery to your leisure battery(s) by using the kit supplied, with very easy to understand fitting instructions and a wiring diagram.
The voltage sense relay simply detects the rise in voltage from you vehicles charging system to allow you to charge your leisure battery(s) while your engine is running. When your engine is switched off, the relay will isolate your leisure battery(s) from your main starter battery. So it does not drain your main starter battery and you will always be able to start your vehicle.
Description:
【Manual State Use Function:】You can complete the circuit connection and disconnection by pressing the blue indicator button each time. When the circuit is switched on, the red indicator and voltmeter will light up. When the circuit is disconnected, the red indicator and voltmeter will go out.
【Automatic State Use Function】 In automatically model,when the input voltage exceeds 13.3V,the voltmeter and red LED indicator will be ON. When the input voltage evoltage drops to 12.7V ,the voltmeter and red LED indicator will be OFF .The circuit will be disconnected automatically when the input voltage reaches lower than 11V or more than 17V in order to protect the secondary battery from high voltage impact.
【Voltmeter Display】The battery isolator surface is equipped with an LED display to display the current voltage status. If two batteries are connected, the voltage displayed on the voltmeter is the battery with higher voltage. Press the button once if the voltmeter is not working and it will display the value for 2 seconds.
【Wide Application】The dual battery isolator waterproof grade is IP68,effective waterproof and dustproof,can work in wet envirorment. Automatically combines two batteries when charging and isolates the two batteries when not charging,which can widely used in 12v camper van trucks, caravans, and camping applications.
Features:
Made of high quality material, strong fiberglass, reinforced nylon shell.
Built-in LED indication (lights up when VSR starts).
Surface or panel mounting options provide flexibility in installation.
Suitable for 12V 4WD, marine, truck, caravan and camping applications.
The dual battery isolator waterproof grade is IP68, with effective waterproof and dustproof capabilities, so it can work in wet environments.
The battery insulator comes with an LED indicator that shows the current voltage. The voltage displayed on the voltmeter is that of the battery with the higher voltage.
The dual battery insulator can automatically combine two batteries when charging and isolate them when no charging takes place to ensure efficient power use. The circuit is disconnected when the input voltage exceeds 17 V or falls below 11 V to protect the batteries from a low or high voltage.
IP68 waterproof
Voltmeter display
High low pressure protection


