- Brand: FcotMiue
- Cell Type: 18650 3500mAh Lithium-ion Battery
- Cell Brand: SAMSUNG (Genuine)
- Nominal Voltage: 52V
- Rated Capacity: 20Ah
- Energy: 1040 Wh
- Assembly Method: 14Series 6 Parallels( 84 Cells)
- Capable for Motor:0-2000W
- BMS: 40A
- Max Constant Discharge Current: 40A
- Peak Discharge Current: 120A
- Max Continuous Charge Current: 5A
- Charge Cut off Voltage: 58.8V
- Discharge Cut off Voltage: 39.2V ~ 42V
- Protections: Over Charge, Over Discharge, Over Current, Short Circuit, Balance
- Way of Charge: CC/CV
- Charging Time: Approx. 6 to 10 hours
- Charging Connector: DC 5521
- Discharge Plug: XT60 (Default)
- Housing Material: ABS Plastic
- Case Colour: Black
- Cycle Life: 1000+ times
- Weight: 5.4kg
- Dimensions: (mm):L368*W90*H141 /(inch):L14.48*W3.54*H5.55
- Safety Certificates: CE, ROHS, MSDS, UN38.3
- Warranty: 1 Year
NOTE: Battery voltage should keep up with motor, but usually 52V battery also can work for most 48V motors too, the 52V battery cycling speed is faster and allows for longer rides.


Attention!!!
As the factory direct store on eBay, we kindly remind:
When you are considering to get a good battery, make sure that has high quality cells and full capacity. Using lower quality or generic cells will have shorter
life cycle and poor performance. Beware of the ultra-low price battery on eBay, most are fake capacity!! You will be cheated if you don't watch out.
Package Includes:
1x FcotMiue 52V 20Ah eBike Lithium Battery Pack (Genuine SAMSUNG Cells)
1x Spare (XT60 Male) Connector Cable
1x 58.8V 3A Charge𝓡( AC plug will be matched as delivery country if without request)
Installation::
1.Open the safety lock after receiving the battery and separate the battery from the mounting plate.
2.Fix the mounting plate to your ebike bottle hole location, and make sure that the end with the discharge cable is downward.
3.Install the battery and lock the safety lock.
4.Connect the battery discharge plug to the plug of the controller.If the plug of your controller is not XT60, we suggest cutting off the connector on the controller, and soldering on an XT60 Male connector.
Note:
-
When purchasing a ebike battery pack, always ensure that voltages are paired correctly (eg. a 48V motor must be paired with a 48V battery). Please note that controllers damaged or burnt out due to reprogramming or incompatible pairing are not covered under warranty.
- The maximum current(Amp) of the battery must be greater than or equal to the power and current of the motor( for example:48V 1000W 30Amp batteries can be used for 48V 500W 20Amp motors,on the cuntrary 48V 500W 20Amp battery can not be use for 48V 1000W 30Amp motor.)
- ''AH'' does not affect the matching of the battery and the motor.It only determines the mileage of the electric bicycle battery. The greater the WH, the longer the mileage.(WH= Volt X AH)
- Please carfull browse the battery patameters before placing your order,make sure your bike frame have enough space to fit the battery, choose the battery that suits your requirement, avoid buying errors.
-
If you are unsure of which battery to pair with your bike, please do not hesitate to contact us for more information.
💯Feedback:
- If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP.
- We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
- Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.