Input voltage: ± 24VDC
Analog signal input range: ± 5V, ± 10V (optional)
Analog signal input impedance: 200K Ω± 1% (differential input)
Position signal input impedance: 1K Ω± 1%
Proportional coefficient of position signal input: 0.33V/°
Proportional coefficient of position signal output: 0.33V/°
Temperature drift: maximum 40PPM/℃
Working temperature: 0 ℃ -45 ℃
Storage temperature: -10 to+60 ℃
Driver board size (length x width x height): 85mmX61mmX36mm
Scan motor parameters
Maximum scanning angle: ± 30 ° optical angle (factory set ± 20 °)
Working temperature: 0 ℃ -45 ℃
Storage temperature: -10 to+60 ℃
Work noise: ≤ 30db
Average working current: 1A
Peak current: 2.5A
Linearity: 99.9%
Small step response time: ≤ 0.50ms
Long term drift (continuous operation for 8 hours): Proportional drift:<50PPM/℃
Zero drift:<15 μ Rad./℃
Repetition accuracy: 8 μ Rad
Coil resistance: 3.8 Ω± 10%
Coil inductance: 180 μ H ± 10
Coil temperature: ≤ 95 ℃
Lens size: 12mm x 7mm x 0.9mm (high-quality dielectric film)
Lens reflectivity:>99% at 45 ° incident angle (covering wavelengths of 400nm-700nm)
scanning speed:
Test angle: ± 20 ° Opt
Working voltage: ± 24 VDC
Speed @ Lens Size: 40Kpps @ 12 * 7 * 0.9
Test pattern: ILDA 30K