Contact Us:
★Thank you for purchasing our product!
★If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
★Thank you for purchasing our product!
★If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
Note:It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness.
1. Need Canbus Decoder/ Resistor: These LED bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder （not included）to cancel the error.
When you encounter undecoded problems, please do not open disputes or bad reviews, please contact customer service directly, we will solve the problem ASAP.
2. Warm Tips:
Some vehicles such as For Ford, For Chevy, For Dodge,For Jeep .etc they may need this decoder (not included）to solve the flicker/error code problem, you can try the decoders to fix. If you need it, you can buy it locally or contact customer service to get a discount to buy it.
1. Need Canbus Decoder/ Resistor: These LED bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder （not included）to cancel the error.
When you encounter undecoded problems, please do not open disputes or bad reviews, please contact customer service directly, we will solve the problem ASAP.
2. Warm Tips:
Some vehicles such as For Ford, For Chevy, For Dodge,For Jeep .etc they may need this decoder (not included）to solve the flicker/error code problem, you can try the decoders to fix. If you need it, you can buy it locally or contact customer service to get a discount to buy it.
Technical Specification:
Plug Type: H7 (High Beam) + H11 (Low Beam) + H11 (Foglight)
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 4000LM/bulb
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP65 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Plug Type: H7 (High Beam) + H11 (Low Beam) + H11 (Foglight)
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 4000LM/bulb
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP65 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp
Package Included:
6Pcs LED Bulbs
New and old packaging will be shipped randomly
6Pcs LED Bulbs
New and old packaging will be shipped randomly
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
On May 5, 2025 at 21:08:11 PDT, seller added the following information:
On May 6, 2025 at 18:31:58 PDT, seller added the following information: