(Random delivery of new and old packaging in the box)
Headlight bulbs:Plug Type: H1 (High Beam) + H11 (Low Beam) LED Quantity(each bulb): 2pcs* 3570 chipsPower: 100W/set,50W/bulbLumens: 8000LM/set (4000LM/bulb)Operating Voltage: DC 9-32V(fit 12V,24V vehicles)Color Temperature: Pure White 6000KIP68 rated water and dust seal,360 degree beam angleMaterial: Aviation 6063 aluminum profileOperating Temperature: -40-80 degree CelsiusOver 50,000hrs lifetimeUsage: headlight,fog lightFog light bulbs:Plug Type: H11/H8Voltage: DC12V-24VWattage: 100W/set,50W/bulbLED Type: COB chipsBrightness: 2400Lumens Per bulb,total 4800LM.Life span: 50,000hrsMaterial: aluminum alloyApplication: Fog lightInstallation: plug and play
Advantage:
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
★ Fitment
This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.
Low Beam may be have two Size, H11B or H11,
Fog Light may be have two Size,881 or H11,
In order to avoid buy wrong size bulb, please double check the bulb size before purchase.
★ Warm Tips
If you are not sure about the bulb size, please send us your vehicles' make/model/year via ebay message to confirm with us before purchasing.
Install Caution:1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Make sure to have the ignition turned off and the keys removed.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.8.Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)