Acrylic Polishing Machine Plexiglass Hydrogen Oxygen Welding Machine H260 Flame Polishing Machine 150 L/h

Model: H260
Power: 800W
Weight: 15kg gas production: 150L / h voltage: 220V
Electrolytic cylinder capacity: 2.4L
Outer package size: 525 * 315 * 530
Number of electrolytic cylinders: 2
Quantity of make-up water tank: 1

Operating instructions:
① Preparation of electrolytic solvent
Add pure water into the container, then introduce polishing agent, stir evenly and cool to room temperature
② Add electrolytic solvent to the cylinder
Screw off the copper cover on the top of the machine, slowly fill the cooling electrolytic solvent with a funnel, close to the normal water level, and tighten the copper cover ③ combustion supporting cup
Screw off the cap of combustion supporting cup, add water or industrial alcohol into the cup (no more than half), and then screw back the cap.
④ Installation and debugging
Put the machine on a firm plane, connect the voltage, connect the required gas pipe, turn on the power switch, and the ammeter indicates zero at that time
⑤ Ignition and test welding
One hand holds the flame gun and screw the valve appropriately, and the muzzle of the gun is toward the neutral position, and then the other hand ignites with a lighter to adjust the gun handle valve to adjust the flame size
⑥ Replenish fluid
Timely replenishment of water, found that the water level of the electrolytic solvent dropped significantly, needed to make up water in time
Clean the electrolytic cylinder once a month and replace the electrolytic solvent