eBay

Feature:

1. This ADF4351 signal source development board has well designed circuit board layout.
2. It can be controlled by the upper computer official software.
3. All control pins are leaded out for convenient .
4. Default + -50ppm 25M active crystal oscillator.
5. Three-wire serial peripheral interface bus to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping.

Specification:

Features:

This ADF4351 signal source development board has well designed circuit board layout.
It can be controlled by the upper computer official software.
All control pins are leaded out for convenient .
Default + ‑50ppm 25M active crystal oscillator.
Three‑wire serial peripheral interface bus to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping.

Specifications:
Output frequency range: 35MHz ‑ 4.4GHz
Supply voltage: 4‑9V (5VDC)
Output signal:
2.2GHZ‑‑4.4GHz sine (fundamental)
35MHZ‑‑2.2GHz squarewave (fundamental division)
Output signal: output speed, signal strength: + 5dBm (programmable)
RF connector: SMA female head
Control Interface: Three‑wire Serial Peripheral Interface Bus
Reference Clock: 10.000MHZ (default), through the interface to an external SMA
Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch
Weight:15g

Connection:
The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock). Pin correspond to the following:
1.GND ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ GND
2.VDD (5V) ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ VCC
3.VO ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ NC (empty)
4.RS ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ NC (empty)
5.R / W ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ MUXOUT
6.EN ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ CLK
7.DB0 ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ DATA
8.DB1 ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ LE
9.DB2 ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ CE (has 10K pullup)
10.DB3 ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ GND (do not take)

Reference Clock:
10.000MHZ default reference clock signal is active clock or an external reference clock signal, you need to modify the three‑way connection with a soldering iron, connect EXT_REF external reference signal.

RF output:
For ease of use, the default is broadband output, the output of two differential signals, one way can be used to output use, the other way can be used to monitor the output.

Package included:
1 x ADF4351 RF Signal Source Frequency Synthesizer

Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg