What is currently on sale is this brand-new power switch equipped with a snubber capacitor. Here, we are selling this brand-new power switch with a snubber capacitor. It is an excellent substitute for a large number of Marantz devices, including many power amplifiers, amplifiers, and tape decks. It may also be applicable to other devices. This product is brand new and of higher quality than the original. It is guaranteed to work excellently for you. The wiring method of the snubber capacitor is the same as the original one. It can significantly reduce the load on the switch, greatly extending its service life. The last picture shows the wiring method of the switch, but the switch you receive will be unwired and brand new. The knob is equipped with a carefully crafted brushed aluminum knob cover, which is beautiful and delicate. The knob has a diameter of 9.5 millimeters (0.37 inches) and a length of 14.5 millimeters (0.57 inches).

This power switch has six contacts on each side. When the plunger is pushed, the rear left and middle left contacts, as well as the rear right and middle right contacts, will be connected respectively. By bridging the contacts (it is recommended to be used with a snubber capacitor), the wiring method of the snubber capacitor is the same as the original one. It can significantly reduce the load on the switch, greatly extending its service life. The spacing between the mounting holes is 20mm, and the thread specification is suitable for the original Marantz screws. The spacing between the mounting holes of many original Marantz switches is 25mm, and we have additionally provided you with one more mounting bracket with a hole spacing of 25mm. This will make it more convenient for you to install and use.
It is simple to install. Just wire it up in the same way as the old one and replace the old snubber capacitor with a new one. If you don't see a snubber capacitor connected to your power switch, it may be connected to an AC power socket at the back, so just look behind and replace it there. If the old power switch has only 4 terminals instead of 6, ignore the two terminals closest to the plunger on the new switch and only use the four rear terminals. The last picture shows how the switch is wired on many Marantz devices.
The operation of replacing the switch involves the processes of soldering and testing. If you choose to replace it by yourself (DIY), make sure to unplug the power switch plug before performing any form of electrical work. Before disassembling the old switch, it is recommended that you use your mobile phone to take more photos of the old switch mounting bracket and the wiring connections of the wires. These photos will be of great help for your subsequent installation of the replacement switch.
If you haven't found the item you need yet, please feel free to let us know. We will definitely do our best to assist you in finding what you need.