Full Black 05*13mm Neon Tube Flexible Silicone Waterproof Led Neon Strip Lights
Name: Black neon flex light
Installation: Surface or Recessed
Size: 5X13mm
Power: 13W/M
Voltage: 12V/24VDC
IP Rating: IP65
NOTE: the package doesn't include the power supply and channel, if you need them, please click the below picture:
HOW to CUT and connect ?
1.Installation of straight and solid end caps for LED neon strip lights.
2.Carefully cut 0.12 in.(3 mm) off of the bottom silicone jacket.
3.Remove enough plastic to expose bottom solder pads on the PCB.
4.Solder the power cable to the bottom solder pads on the PCB.
5.Fill interior of front cap with silicone sealant and attach.
6.Fill interior of end cap with silicone sealant and attach.
7.Install with adhesive (not included) or optional mounting accessory8.Apply power and ensure light(s) operate properly.Right angle end cap installation follows the same steps,
The Silicone Cover Flexible Recessed cover for a Custom 12/24V Neon LED Strip can be installed in all types of installations with LED strips inside, specially designed to protect and hide the LED strips, allowing for professional, clean and stylish installations.
The silicone profiles are flexible and when the LED Strip is installed, a Neon light effect is achieved. They are made for lighting modern environments with a clean and elegant indirect light. Thanks to the opaque cover a diffused lighting effect is created which is pleasing to the eye.
The Neon Silicone Flexible Profiles are suitable for different decorative applications, such as creating lines of light, creating figures, marking corridors or stairs, illuminating shelves, aesthetic solutions, etc.
Installation Instructions
Installation: Surface or Recessed
Size: 5X13mm
Power: 13W/M
Voltage: 12V/24VDC
IP Rating: IP65
NOTE: the package doesn't include the power supply and channel, if you need them, please click the below picture:
HOW to CUT and connect ?
1.Installation of straight and solid end caps for LED neon strip lights.
2.Carefully cut 0.12 in.(3 mm) off of the bottom silicone jacket.
3.Remove enough plastic to expose bottom solder pads on the PCB.
4.Solder the power cable to the bottom solder pads on the PCB.
5.Fill interior of front cap with silicone sealant and attach.
6.Fill interior of end cap with silicone sealant and attach.
7.Install with adhesive (not included) or optional mounting accessory8.Apply power and ensure light(s) operate properly.Right angle end cap installation follows the same steps,
The Silicone Cover Flexible Recessed cover for a Custom 12/24V Neon LED Strip can be installed in all types of installations with LED strips inside, specially designed to protect and hide the LED strips, allowing for professional, clean and stylish installations.
The silicone profiles are flexible and when the LED Strip is installed, a Neon light effect is achieved. They are made for lighting modern environments with a clean and elegant indirect light. Thanks to the opaque cover a diffused lighting effect is created which is pleasing to the eye.
The Neon Silicone Flexible Profiles are suitable for different decorative applications, such as creating lines of light, creating figures, marking corridors or stairs, illuminating shelves, aesthetic solutions, etc.
Installation Instructions
