eBay

【High Power】With the 3000W power and fast heat conduction heating tube, the water heater can provide you with uninterrupted hot water within 3-5 seconds of turning on the faucet. The water inlet and outlet adopts the international common G1/2-inch connector, and the 0.78-inch outer diameter can be well adapted to all kinds of water pipes, faucets, showerheads and so on.
【Temperature Control】After turning on the faucet, press and hold the power button for 6 seconds to set between Fahrenheit or Celsius, allowing people who are used to using different units to quickly determine the current temperature. Measuring only 4.33*2.8*7.87 inches, this tankless water heater can be easily installed under the sink or other narrow spaces to provide you with long lasting hot water.
【Safe to Use】When the water flow is turned off, it will go directly into standby mode, giving you more peace of mind. Quadruple protection function (ground setting, anti-dry burning, leakage protection, overheating protection), triangular socket and IPX4 protection rating effectively ensure safety and give you peace of mind. It can heat water up to 68-122 °F, so it won't cause you scalding.
【Selected Materials】304 stainless steel inner liner is pressure resistant and explosion proof. 316L stainless steel heating tube has good thermal conductivity to speed up the heating process. The outer shell is made of ABS, hard and solid. Brass interface is corrosion-resistant and abrasion-resistant to ensure good long-term performance.
【Easy to Operate】You only need to control the water flow to control the temperature (low temperature for large water flow, high temperature for small water flow), and you can enjoy the warm hot water immediately. The electronic screen will clearly display the current water temperature, even the elderly can quickly operate.

How to Install
1.Drill holes in the wall. Insert the plastic expansion tubes into the holes.
2.Tighten the water heater with screws. The water heater must be installed vertically.
3.Connect the cold water inlet pipe to the inlet nipple and the water outlet pipe to the outlet nipple.
4.Before connecting the power, fill the tank and system with water and check for leaks.
5.Open the hot water faucet until constant water flows from them. Otherwise, damage to the element may occur.
Specifications
Model: XY-FC
Color: Red
Material: Brass, ABS, 304 Stainless Steel, 316L Stainless Steel
Surface Treatment: Pickling
Power Source: Corded Electric
Water Inlet Mode: Bottom Water Inlet
Mounting Type: Wall-Mounted, Floor-Mounted, Under Sink
Temperature Regulation Range: 20-50°C/68-122°F
Power Cord Length: 1.05m/3.44ft
Assembly Required: Yes
Number of Items: 1
Power: 3000W
Voltage: AC 110V
Frequency: 50-60Hz
Waterproof Level: IPX4
Water Pressure: 0.04-1.2MPa
Wire Request: Wire Cross Section ≥2.5mm²/0.0038in²
Suggest Minimum Reserved Installation Space: 30*30*25cm/11.81*11.81*9.84in
Net Weight: 0.95kg/2.1lbs
Product Size: 11*7*20cm/4.33*2.8*7.87in
Tank Length: 16cm/6.3in
Package Included
1*Water Heater
1*English Manual
All Accessories for Assembly
Notes
1.Please carefully read the manual and strictly follow the precautions to have a better experience.
2.Please note that this product only supports vertical installation, as horizontal installation may cause dry burning. And ensure to add water before connecting to the power supply during the first use.
3.This product is recommended to be connected with wires with a cross-sectional area of ≥ 2.5 square millimeters, and connected to trip switches of over 32a for use.
4.If the water flow decreases, please check if the filter element is blocked.