Inside Package:

Gigabyte B365M D2VX SI mATX Motherboard

+  I/O Shield

Supporting Intel 8th and 9th gen i3 i5 i7 i9 CPU

Note:

This motherboard will fit mATX or ATX Case

Please Please message me before place order if you have any compatibility or installation questions

Specification

• Central Processing Unit (CPU)
  Support for LGA1151 socket:
  1. 9th and 8th Generation Intel ® Core™ i9 Processor/Intel ® Core™ i7 Processor/Intel ® Core™ i5 Processor/Intel ® Core™ i3 Processor/Intel ® Pentium ® Processor/Intel ® Celeron ® Processor
  2. L3 cache depends on CPU

  (pleasetoPlease refer to GIGABYTE website for a list of supported processors)
• Chipset
  1. Intel ® B365 Express Chipset
• Memory
  1. 2 DDR4 DIMM slots, supporting up to 32 GB
  2. Support dual channel memory technology
  3. Supports DDR4 2666/2400/2133 MHz
  4. Supports ECC Un-buffered DIMM 1Rx8/2Rx8 memory (operating in non-ECC mode)
  5. Support non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
  6. Supports Extreme Memory Profile (XMP) memory *To support 2666MHz or XMP memory, a 9th or 8th generation Intel ® Core™ i9/i7/i5 processor
     is required .

  
  
• Display functions
  Based on graphics-capable processors - Intel ® HD Graphics supported:

  1. 1 x DVI-D port, supporting resolutions up to 1920x1200@60 Hz

  supportmaximumShared video memoryto1 GB
  Actual support may vary depending on CPU
• Sound
  1. Integrated Realtek ® ALC887 chip
  2. Support High Definition Audio
  3. Supports 2/4/5.1/7.1-channel
     audio* To enable 7.1-channel audio, you must use an HD (High Definition) front panel audio module and enable the multi-channel audio feature through the audio driver.
• network
  1. Integrated Realtek ® GbE network chip (10/100/1000 Mbit)
• Expansion slots
  1. 1 PCI-E x16 slot, supports x16 operation specifications
  2. 2 PCI-E x1 slots
     (allPCI-E slots all support PCI-E3.0)
• Storage device interface
  Based on chipset:

  1. 1 x M.2 slot (supports Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD)
  2. 4 SATA 3.0 ports
  3. Supports RAID 0, RAID 1, RAID 5 and RAID 10 functions
     * For M.2/SATA port installation precautions, please refer to the "1-7 Interface and Jumper Introduction" section.

  Intel® Optane ™ Memory Ready
• USB
  Based on chipset:

  1. 6 USB 3.1 Gen 1 ports (4 on the back panel, 2 connected via ribbon cables from the motherboard's internal USB ports)
  2. 6 USB 2.0/1.1 ports (2 on the back panel, 4 connected via cables from the motherboard's internal USB ports)
• Internal socket
  1. 1 24-pin motherboard power socket
  2. 1 8-pin CPU power socket
  3. 1 CPU fan socket
  4. 1 system fan header
  5. 4 SATA 3.0 ports
  6. 1 motherboard jumper socket
  7. 1 front audio jack
  8. 1 USB 3.1 Gen 1 port
  9. 2 USB 2.0/1.1 ports
  10. 1 security encryption module (TPM) socket (2x6 pin, only used with GC-TPM2.0_S)
  11. 1 COM socket
  12. 1 Clear CMOS data pin
• Rear panel device connection socket
  1. 1 PS/2 mouse port
  2. 1 PS/2 keyboard port
  3. 1 x DVI-D port
  4. 4 USB 3.1 Gen 1 ports
  5. 2 USB 2.0 ports
  6. 1 RJ-45 network cable interface
  7. 3 audio interfaces
• I/O Controller
  1. Integrated iTE ® I/O control chip
• Hardware Monitoring
  1. Voltage detection
  2. Temperature detection
  3. Fan speed detection
  4. Over temperature warning
  5. Fan failure warning
  6. Fan Xpert
     * Whether the Fan Xpert function is supported will vary depending on the cooling fan.
• BIOS
  1. 1 x 128 Mbit flash
  2. Use licensed AMI UEFI BIOS
  3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0