

What Updates Do We Did on Xtool D8s in 2025?
>> 2025 Upgraded Ver. of the XTOOL D8 Scanner: XTOOL D8S obd2 scanner diagnostic tool has packed all capabilities auto technicians would ever need for daily repair & maintenance services: ✅Topology Mapping, ✅Key Programming/IMMO,✅ 4000+ Active Tests, ✅42+ Rest Services, ✅PMI(Programmable Module Installation fit for Ford/Mazda,etc ),✅ E.CU Coding,✅ Refresh Hidden Functions, ✅OE All Systems Diagnosis, ✅FCA AUTOAUTH & CAN FD & DoIP, ✅Export Data & ✅Up to 8 pids Graphing, ✅Pre/Post Scan,✅ V2.0 Diagnostic Report, ✅100,000+ Car Coverage✅3 Years Software Updates & 2 Years Warranty✅10000+Wide Range Vehicle Coverage✅ Top Hardware Configuration.
🔥🔥🔥Xtool D8s Bi-directional Control Scanner,Upgrade Version of Xtool D8/D8bt/D7/D7s/D7w
Super Hardware, 10x Faster Working Speed:🔼 8-Inch LCD Touchscreen with 🔼1024 x 768 High-Resolution , with🔼 4G RAM, 64 GB ROM storage for the smoothest and fastest diagnosis,🔼 5G&2.4GHz Dual-Wifi, 🔼Android 10.0 operating system. Long-lasting 🔼5000 mAh,7.2V battery, 🔼 Quad-Core 1.5GHz CPU Processor,🔼 8.0 Megapixel Rear camera.
What Makes XTOOL D8S V2.0 More Powerful?
▶️FCA AutoAuth:Access to the security gateway module for Fiat/ Chrysler/ Dodge/ Jeep vehicles 2018 and newer , so that the diagnostic tool can clear codes, run bi-directional active tests,relearns or even I-MMO programming etc.
▶️ OE-Level All System Diagnosis with Topology Mapping :With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system. Access all the available systems and perform in-depth inspections for the whole car,for every electrical modules for detailed fault codes, live data, freeze frame, ECU information ,etc.
▶️ Advanced E.CU Coding (Online & Offline):Customize your car, reprograms the adaptive data for certain components after repairs or replacements, unfold the hidden functions, or disable the annoying functions to improve your car’s performance.(only seen on TOP-level diagnostic scanners before. for VW/Audi/Skoda etc)
▶️ 4000+Active Test (Bi-Directional Control): Send commands to ECU and control actuators to perform corresponding actions to locate the faults accurately.
▶️ 42+ Maintenance Services & Full Special Functions: Oil Reset, EPB, BMS, SAS, DPF, Throttle Relearn, ABS Bleed, injector Coding, Air Suspension, Transmission Relearn, TPMS Reset, Airbag Repair, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector Balance Test, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, rewrite the vin on pcm, alcohol composition reset, Suspension calibration, etc.(NOTE: Functions vary by vehicle model, year, system, etc.)
▶️ PMI (Offline Programming)Function:Downloaded from the existing module and then uploaded to the new module to finish ECU module replacement.(for Ford/Mazda..)
▶️ DoIP/ CAN FD Protocols:Provide high-speed vehicle diagnostic communication and data transfer,covering new vehicle models up to 2025,working perfectly for GM vehicles produced after 2020, and compatible with BMW F G Chassis models, for Jaguar & Land Rover after 2017, for Volvo after 2018.
▶️ AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
▶️ 10000+ Vehicle Coverage:Covers 10000+ Vehicles includes American, European, Asian, Japanese brands.
▶️ 3 Years Free Update: Enjoy peace of mind with 3 years of free software updates, ensuring your diagnostic tool remains up-to-date with the latest vehicle models and functionalities.
NOTE: Please contact online customer service first to solve any problems!


Powerful Topology Module Diagnostic, Simplify Your Workflow Processes!
With the structure topology of function, XTOOL D8S can show all the vehicle modules with a colour coded topology communication structure network, all the faults of each module and relationship between different modules can be viewed from it at a glance.You can press any module to display any DTCs and access that system.
- Intuitively display the current module status, all come in view (includes whether there’s a DTC in a specific module, and the number of DTCs);
- Systematically show the communication structure between the modules;
- Directly display the fault code and enter the system service function;
- Clearly view the color coded module status tree by zooming in and out;
Note: The functions are not universally compatible for all the cars. Please send us your VIN# to help you check compatibiity.

2025 New Added Functions to Turn Your Business to Fast Lane, Customize Your Own Car Easily!
🏅Advanced ECU Coding: Online Coding/Matching/Calibration/Relearn/Personalization/Retrofit/Customization (for VW/AUDI/SKODA/BENZ/MITSUBISHI/BMW)
Online Coding: this XTOOL D8S OBD2 scan tool can directly access the online vehicle repair data to do high-level repairs.
Offline Coding: read the code from the original module, and then write the code for the new module,for example ,write a VIN to new ECU.
🏅 Offline Programming (PMI) : When you replace or initialize a new/used module for Ford/for Lincoln/for Mazda, allows you to program the data from the original module to the new unit to finish the module replacement.No need using the J2534 or buying a subscription.
🏅 Refresh the hidden features: Refresh means to release or restart, and we need to personalize the settings through this function,for example,disable auto start-stop, disable daytime running light, disable safety belt chiming ,delete transport mode .delete transmission adaptive value.setting speed limits,etc.(Fit for BMW, for VW, for AUDI, for SKODA, for TOYOTA, for LEXUS, for SCION, for MAZDA, for FORD, for LINCOLN, etc.)


FCA Autoauth/CAN FD/DoIP + Wide Vehicle Coverage:
Upgrade of D8 car scanner diagnostic, XTOOL D8S scan tool supports OBDII, EOBD and FCA Autoauth(for Chrysler, for Dodge, for Jeep vehicles from 2018 onwards) and CAN FD (for GM 2020+ cars) and DoIP (for BMW E/F/G Chassis/Jaguar/Land Rover, Upgraded)to perform diagnostics. It can work on 10,000 cars globally, including 12V sedans, light duty trucks, SUVs, mini vans, hybrids. With software updates, the vehicle coverage grows continuously!
42+ Commonly Used Maintenance Service
Like D8/D8 BT, D8S supports 42+ popular service functions. Whenever and wherever you want to maintain your vehicle, D8S will be your best choice
- Oil Reset:Reset Engine Oil Life System & service intervals after engine oil is changed.
- EPB:Resetting parking brake pads after replacement.
- SAS:Reset the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.
- BMS: Register the battery replacement and etc.
- Injector Coding: Coding injectors after replacement.
- ABS Bleed:Helps to easily vent air from the ABS system, make ABS brake more sensitive
- Sunroof Reset:Initializes when the sunroof is closed or closed.
- Suspension Reset:Adjust the ride height sensor for level calibration
- Gearbox Reset:Help complete gearbox self-learning and improve gearshift quality.
Also include TPMS Reset,Airbag Reset,A/F Setting,Throttle Relearn,Gear Learning,Speed Limit,HV Battery,A/C Relearn,SRS Reset,D^PF Regeneration,Tire Upgrade,EGR Relearn,Seat Calibration,Power Balance,Language Change,Transporte Mode,Windows initialization,ADAS Calibration,E^CU Configuration,Clutch Adaption,Start/Stop Reset,Instrucment Cluster(mile correction),etc.
Note: Services functions are varies by vehicles, please send car make, year, model, VIN and the specific functions to us check compatibility.
NOTE: Functions vary from vehicles, please send us the VIN of your vehicle to checl the compatibility.
4000+ Full Bi-Directional Control/ Active Tests/ Functional Tests/ Inspection Tests
XTOOL D8S can accurately figure out whether a specific system, component or subsystem in vehicles goes well and pinpoint the location of the problem by interactively operating and testing the vehicle’s related actuators.Such as Injector Test, Turn Off ACC Lane Keeping Assist System (LKAS), Turn ON/OFF Front and Rear side ACM Solenoid, turning the fuel pump on and off, cycling the a/c, clutch on and off, Left clutch electromagnetic coil test, Acceleration Device Test, Oil Pressure Control Test, DYNAMIC camera aiming, Vehicle level position cali-bration, Brake Vacuum Pump, Inlet, and Outlet Valve tests, ect.
OE-Level Full System Diagnostics
XTOOL D8S supports scan all available systems on 99% cars. It can retrieve E~CU information, read & erase DTCs, view live data, Freeze data frame on Engines/ Transmission/ Airbags/ ABS/ SBS/ Doors/ Gateway/ Steering Angle/ Air Suspension/ Body and so on.
- Read Codes – Displays detailed information of DTC records, including manufacturer-specific codes, pending codes, permanent codes
- Clear Codes – Clear codes, reset monitors and turn off warning lights
- Live Data – Retrieves and displays live data and parameters, including misfire, engine rpm, transmission fluid temperature and etc.
- Freeze Frame – Retrieve the parameters when recording the DTC for better diagnosis.
- E~CU Information – provides the retrieved E~CU information in detail.
- Auto Scan – starts auto scanning for all the available systems on the vehicle.
- Control Units – displays a selection menu of all available control units of the test vehicle.

8-in-1 Live Data Graphing &Export Data as CSV/PDF File:
The 8-in-1 live data function of the XTOOL D8S allows technicians to view, record, and analyze real-time data from multiple vehicle systems simultaneously. This feature helps in diagnosing complex issues quickly, enabling efficient troubleshooting and accurate repairs by comparing data streams side by side.
Pre/Post Scan & Upgraded V2.0 Diagnostic Report 2.0:
XTOOL D8S scan tool have added Pre/Post Scan and upgraded V2.0 Diagnostic Report, making the D8S obd2 scanner worth more than the price over $1000 on the market. XTOOL never stop the pace of progress!