eBay

Product Description

For 2013-2019 DODGE RAM Car Radio Fascia Panel Trim Double 2 Din Frame & Harness

100% New & Excellent Quality
Strictly QC, Each item was fully checked before shipping

FREE & FAST Shipping delivery with Tracking Number

Condition: 100% new

Color: Black
Material: ABS Plastic
Inner Size :2 DIN
Placement on Vehicle: Front, Center
Compatible With: For DODGE RAM 2013-2019
This Is Aftermarket Replacement Item But Not Genuine

Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.

3) No Car stereos, Just brackets and harness included.

Feature:

1) According to the original factory specifications.
2) Perfect match for the original one.
3) Easy installation.Direct Replacement.

4) Stable characteristics, high reliability.

Item included:

1 x Fascia Panel Trim Double 2 Din Frame

1 x Power Harness and canbus for Android Radio machine

On May 13, 2023 at 07:20:13 PDT, seller added the following information:

PLS Note:

Vehicle Compatibility Chart May Vary Depending On Vehicle Options, Production Dates, And Install Application.

Please Inquire Before Purchase.

Wire Harness Does Not Work On Vehicles With Premium Factory Sound System.

Wiring Harness Is NOT Compatible With Premium BOSE, Amplified Sound Systems And Onstar.

Please Verify Your Vehicle's Original Sound System Specifications Before Purchasing Your Harness.

Tips

Tips:

1.Why can't turn on the car radio ?

1.1Please check the Voltage of car radio:12V

1.2When you test this car radio,you can combine the red and yellow wires and connect them to the positive side of the power supply.Black line to negative power supply.

1.3Replace the same type of insurance to test the car radio.

Note: Please must use our power cables to connect our car radio,it is not possible to insert the original car plug directly into our machine.

2.Why the car radio will show "No Signal" when we reversing?

2.1Please check if the camera's line is properly connected to the car radio.

Note:The video port of rear camera must insert the "CAMIN" port of car radio.

2.2 Please check whether the pink wire is connected to the line on the positive 12V? If not, there will be a light on but the display does not appear reverse image.

3.Why does the radio not turn off after turning off the engine and keep consuming power?

Check if the red ACC power cable and canbus are not disconnected? Otherwise it will keep powering up

4.Why can't search FM?

4.1: No radio antenna inserted;

4.2: Please check if the radio antenna is plugged in. Please insert more antennas several times to make it well contacted;

4.3: The signal of your location is not good. Please go to a better place to test again

4.4: The radio antenna on the car is broken/no effect; please replace the radio antenna and test again.

5.Why can't connect the Bluetooth of car radio?

5.1 Open the phone settings interface, open the Bluetooth in the Bluetooth function, search for Bluetooth devices, find the player's Bluetooth model to be paired; if you need a pairing code, enter 0000; if not, try 1234 or 123456.

5.2 Please try to use another mobile phone to test this function.

All methods are correct and still cannot use Bluetooth, Please unplug the plug on the back of the player and plug it in after 3 minutes.

Tips

Tips:

1.Why can't turn on the car radio ?

1.1Please check the Voltage of car radio:12V

1.2When you test this car radio,you can combine the red and yellow wires and connect them to the positive side of the power supply.Black line to negative power supply.

1.3Replace the same type of insurance to test the car radio.

Note: Please must use our power cables to connect our car radio,it is not possible to insert the original car plug directly into our machine.

2.Why the car radio will show "No Signal" when we reversing?

2.1Please check if the camera's line is properly connected to the car radio.

Note:The video port of rear camera must insert the "CAMIN" port of car radio.

2.2 Please check whether the pink wire is connected to the line on the positive 12V? If not, there will be a light on but the display does not appear reverse image.

3.Why does the radio not turn off after turning off the engine and keep consuming power?

Check if the red ACC power cable and canbus are not disconnected? Otherwise it will keep powering up

4.Why can't search FM?

4.1: No radio antenna inserted;

4.2: Please check if the radio antenna is plugged in. Please insert more antennas several times to make it well contacted;

4.3: The signal of your location is not good. Please go to a better place to test again

4.4: The radio antenna on the car is broken/no effect; please replace the radio antenna and test again.

5.Why can't connect the Bluetooth of car radio?

5.1 Open the phone settings interface, open the Bluetooth in the Bluetooth function, search for Bluetooth devices, find the player's Bluetooth model to be paired; if you need a pairing code, enter 0000; if not, try 1234 or 123456.

5.2 Please try to use another mobile phone to test this function.

All methods are correct and still cannot use Bluetooth, Please unplug the plug on the back of the player and plug it in after 3 minutes.