• Specifications: Working voltage: DC12V (27A battery is not including) Operating Current: ≤ 8mA Working frequency: 433MHz Modulation Mode: ASK (AM) The transmission power: ≤ 100mW Emission Distance: 100 m (proof) The encoding type: self Copy The working temperature: -10 ° C to +50 ° C Works with the following remote control IC modules (please check your original remote control before ordering), and your remotes also should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etc
  • Your best online business partner

    4-in-1 Remote Control Duplicator Wireless Switch Copy Clone Code Duplicator ACF

    Specifications:
    Working voltage: DC12V (27A battery is not including)
    Operating Current: ≤ 8mA
    Working frequency: 433MHz
    Modulation Mode: ASK (AM)
    The transmission power: ≤ 100mW
    Emission Distance: 100 m (proof)
    The encoding type: self Copy
    The working temperature: -10 ° C to +50 ° C
    Works with the following remote control IC modules (please check your original remote control before ordering),
    and your remotes also should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527.
    FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etc

    Application: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products

    How to Program:
    Step 1 –delete the existing code of our remote duplicator
    1)Click and Hold A and B buttons together - Led will flash 3 times
    2)Keep holding A button and release B button
    3)Keep holding A button and push B button 3 times, Led will start flashing
    Non-stop

    Now press any key on the remote control, LED lights are not bright, so delete code success;
    if you press the button LED lamp is lit, indicating that the original code is not deleted !

    Step 2 - clone your original remote
    1)Put both remotes Into back to Back position. Make sure they have direct-contact

    2)Click and hold 1 button on your original remote and 1 button on your clone remote.
    Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)

    If for some reason the clone does not go further then 2 blinks , it means the signal does not go through,
    please shift the remote slowly up and down until you get the point where it will go through.


    Color: Black/red/blue/white/grey
    Type: Auto Remote Control Duplicator
    Material: Metal+Plastic


    Package Contents:
    1 x Remote Control Duplicator


    Item Specifics
    Brand Unbranded
    Type Auto Remote Control Duplicator

    Payment

    Payment
    1) We accept PayPal payment only, and must be received within 3 days from the date of purchase.
    2) Please leave note in PayPal when making the payment if you have any special requests.
    3) Orders will be processed instantly and dispatched within 2-3 business days, so we do NOT accept any email/message note after you place orders.

    Shipping
    Shipping
    1) We ONLY ship within Australia.
    2) Orders will be processed and dispatched within 48 hours after payment is clear.
    3) You can get the product in 6-9 working days. Delivery may be delayed during weekends and holidays. We'll strive our best to provide you the most reliable, affordable way of shipping service. But sometimes it is highly depended on the courier companies and local customs

    4) We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

    Returns

    Refund
    1) We offer 30 days return policy. Please contact us within 14 days from the date you receive your order if you have any issues with the product and would like to return.
    2) All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number,
    specific reason for the return, and your eBay ID.
    3) We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included,
    AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
    4) Buyer is responsible for return shipping cost.

    Contact Us

    Feedback
    1) We strive for our customer satisfaction at best possible.
    If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a week.
    We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
    2) We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
    Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have.
    3) Please DON’T leave negative or neutral feedback if you haven’t received item in 15 days, because we have mentioned the shipping time repeatedly.

    Your best online business partner

    Shop Category
    Hot Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    4-in-1 Remote Control Duplicator Wireless Switch Copy Clone Code Duplicator ACF

    Specifications:
    Working voltage: DC12V (27A battery is not including)
    Operating Current: ≤ 8mA
    Working frequency: 433MHz
    Modulation Mode: ASK (AM)
    The transmission power: ≤ 100mW
    Emission Distance: 100 m (proof)
    The encoding type: self Copy
    The working temperature: -10 ° C to +50 ° C
    Works with the following remote control IC modules (please check your original remote control before ordering),
    and your remotes also should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527.
    FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etc

    Application: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products

    How to Program:
    Step 1 –delete the existing code of our remote duplicator
    1)Click and Hold A and B buttons together - Led will flash 3 times
    2)Keep holding A button and release B button
    3)Keep holding A button and push B button 3 times, Led will start flashing
    Non-stop

    Now press any key on the remote control, LED lights are not bright, so delete code success;
    if you press the button LED lamp is lit, indicating that the original code is not deleted !

    Step 2 - clone your original remote
    1)Put both remotes Into back to Back position. Make sure they have direct-contact

    2)Click and hold 1 button on your original remote and 1 button on your clone remote.
    Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)

    If for some reason the clone does not go further then 2 blinks , it means the signal does not go through,
    please shift the remote slowly up and down until you get the point where it will go through.


    Color: Black/red/blue/white/grey
    Type: Auto Remote Control Duplicator
    Material: Metal+Plastic


    Package Contents:
    1 x Remote Control Duplicator

    Item Specifics
    Brand :Unbranded
    Type :Auto Remote Control Duplicator

    Payment

    Payment
    1) We accept PayPal payment only, and must be received within 3 days from the date of purchase.
    2) Please leave note in PayPal when making the payment if you have any special requests.
    3) Orders will be processed instantly and dispatched within 2-3 business days, so we do NOT accept any email/message note after you place orders.

    Shipping
    Shipping
    1) We ONLY ship within Australia.
    2) Orders will be processed and dispatched within 48 hours after payment is clear.
    3) You can get the product in 6-9 working days. Delivery may be delayed during weekends and holidays. We'll strive our best to provide you the most reliable, affordable way of shipping service. But sometimes it is highly depended on the courier companies and local customs

    4) We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

    Returns

    Refund
    1) We offer 30 days return policy. Please contact us within 14 days from the date you receive your order if you have any issues with the product and would like to return.
    2) All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number,
    specific reason for the return, and your eBay ID.
    3) We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included,
    AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
    4) Buyer is responsible for return shipping cost.

    Contact Us

    Feedback
    1) We strive for our customer satisfaction at best possible.
    If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a week.
    We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
    2) We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
    Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have.
    3) Please DON’T leave negative or neutral feedback if you haven’t received item in 15 days, because we have mentioned the shipping time repeatedly.


    All right reserved.