Description
ROBOTIS Dynamixel Starter Set with U2D2 Power Hub Board + U2D2 USB Converter + 5V 5A Power Adapter
Attention:
- The DYNAMIXEL Starter Set does not include DYNAMIXEL unit.
- Please select the right DYNAMIXEL for your project by referring to DYNAMIXEL Selection Guide https://en.robotis.com/service/selection_guide.php
Description:
The DYNAMIXEL Starter Set is ROBOTIS' recommendation for all first-time users of DYNAMIXEL smart actuators and for any users looking for a method to connect their DYNAMIXEL to a PC. With the DYNAMIXEL Starter Set, users can:
- Connect and configure DYNAMIXELs using ROBOTIS software
- Provide power and communication to connected DYNAMIXELs
- Operate DYNAMIXELs using ROBOTIS programming libraries/resources (ROS, C/C++/C#, MATLAB, LabVIEW, Python, Java)
- Test and program DYNAMIXEL firmware features
- Update and Recover DYNAMIXEL firmware
- Perform Self-Diagnosis and Troubleshooting
- Control DYNAMIXEL directly from a USB port on any computer/SBC (including Raspberry Pi)
U2D2 USB Communication Converter:
- U2D2 is a compact USB communication converter that enables users to control and operate DYNAMIXEL with a computer.
- It is smaller than the previous model and has mount holes to make it easier to install on robots. It uses a micro-B USB cable to connect to the user's computer and prevents damage of the USB terminals. It has both 3-pin connectors for TTL communication and 4-pin connectors for RS-485 communication to allow universal compatibility with any model of DYNAMIXEL.
- U2D2 supports direct connections to/from UART as well. To connect DYNAMIXEL models using Molex connectors, ROBOTIS offers "convertible" cables with one Molex and one JST connector compatible with U2D2.
U2D2 Power Hub Board (PHB):
- U2D2 Power Hub Board combines with the U2D2 converter to supply a variety of external power sources to DYNAMIXEL units.
- The board is capable of supplying power to all models of DYNAMIXEL using the SMPS port, terminal block, and 2-pin power connector. The board has holes to attach the U2D2 module and it can be attached using plastic rivets supplied in the package. It provides a power switch for a convenient method to turn power ON/OFF.
Specifications:
- U2D2 Dimensions: 48mm x 18mm x 14.6mm
- U2D2 Weight: 9g
- U2D2 Available Parts:
* 3-pin TTL Level: TTL Communication supported DYNAMIXEL
* 4-pin RS-485: RS-485 Communication supported DYNAMIXEL
* 4-pin UART: Controllers that support 4-pin UART (such as CM-150 and CM-200)
- U2D2 Baud Rate: 9600-6Mbps
- Power Hub Board Dimensions: 48mm x 57mm
- Power Hub Board Operating Voltage: 7.4-24.0V
- Power Hub Board MAX Current: 10.0 A
Attention:
- The DYNAMIXEL Starter Set does not include DYNAMIXEL unit.
- Please select the right DYNAMIXEL for your project by referring to DYNAMIXEL Selection Guide https://en.robotis.com/service/selection_guide.php
Description:
The DYNAMIXEL Starter Set is ROBOTIS' recommendation for all first-time users of DYNAMIXEL smart actuators and for any users looking for a method to connect their DYNAMIXEL to a PC. With the DYNAMIXEL Starter Set, users can:
- Connect and configure DYNAMIXELs using ROBOTIS software
- Provide power and communication to connected DYNAMIXELs
- Operate DYNAMIXELs using ROBOTIS programming libraries/resources (ROS, C/C++/C#, MATLAB, LabVIEW, Python, Java)
- Test and program DYNAMIXEL firmware features
- Update and Recover DYNAMIXEL firmware
- Perform Self-Diagnosis and Troubleshooting
- Control DYNAMIXEL directly from a USB port on any computer/SBC (including Raspberry Pi)
U2D2 USB Communication Converter:
- U2D2 is a compact USB communication converter that enables users to control and operate DYNAMIXEL with a computer.
- It is smaller than the previous model and has mount holes to make it easier to install on robots. It uses a micro-B USB cable to connect to the user's computer and prevents damage of the USB terminals. It has both 3-pin connectors for TTL communication and 4-pin connectors for RS-485 communication to allow universal compatibility with any model of DYNAMIXEL.
- U2D2 supports direct connections to/from UART as well. To connect DYNAMIXEL models using Molex connectors, ROBOTIS offers "convertible" cables with one Molex and one JST connector compatible with U2D2.
U2D2 Power Hub Board (PHB):
- U2D2 Power Hub Board combines with the U2D2 converter to supply a variety of external power sources to DYNAMIXEL units.
- The board is capable of supplying power to all models of DYNAMIXEL using the SMPS port, terminal block, and 2-pin power connector. The board has holes to attach the U2D2 module and it can be attached using plastic rivets supplied in the package. It provides a power switch for a convenient method to turn power ON/OFF.
Specifications:
- U2D2 Dimensions: 48mm x 18mm x 14.6mm
- U2D2 Weight: 9g
- U2D2 Available Parts:
* 3-pin TTL Level: TTL Communication supported DYNAMIXEL
* 4-pin RS-485: RS-485 Communication supported DYNAMIXEL
* 4-pin UART: Controllers that support 4-pin UART (such as CM-150 and CM-200)
- U2D2 Baud Rate: 9600-6Mbps
- Power Hub Board Dimensions: 48mm x 57mm
- Power Hub Board Operating Voltage: 7.4-24.0V
- Power Hub Board MAX Current: 10.0 A
Cautions:
- When using the terminal block, please pay attention to the polarity when using external power.
- Various pins are exposed behind the board. We recommend users to assemble and use the included supports with the board.
- Left side is - and Right side is +.
Package Included:
- 1 x U2D2 USB Communication Converter
- 1 x U2D2 Power Hub Board
- 1 x 5V 5A Power Adapter
- 1 x USB Micro-B Cable
- 1 x ROBOT Cable-X3P 100mm
- 1 x ROBOT Cable-X4P 100mm
- 1 x ROBOT Cable-X3P 180mm (Convertible)
- 1 x ROBOT Cable-X4P 180mm (Convertible)
- 4 x M3 Nuts
- 4 x Supports M3x10x6
- 4 x Plastic Rivets (for U2D2 attachment)
Packaging Details:
- Weight: 0.55kg
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Nov 14, 2024 at 01:46:54 PST, seller added the following information: