8in/10in ANTMINER SILENCING KIT. This is the ultimate silencing and cooling solution for all antminer asics. ADDITIONALLY COOLS THE POWER SUPPLY INCREASING EFFICIENCY AND PERFORMANCE. MADE FROM HIGH TEMPERATURE RESISTANT PLASTIC.

MOST COMPACT KIT AVAILABLE TO REDUCE OVERALL MINER LENGTH.  

 

This is a Complete Kit.... Everything you will need BUT the Blower/Fan(Sold Separately). 

  COMPATIBLE WITH THE FOLLOWING 10IN DUCT FANS (NOT INCLUDED):

·       AC Infinity Cloudline Pro S10 (For S21 XP, Pro, Plus)

·       AC Infinity Cloudline Pro S8 (For all Other Models)

 

 

Can Be Purchased from: Amazon, Ebay or directly from AC Infinity Website

. 

 

PLEASE VERIFY FITMENT BEFORE SELECTING KIT SIZE!!!

 

Please see the listing images to determine the proper kit needed. Correct kit size must be selected to make sure kit fits your unit and correct fan emulators are sent.

 

· 30mm - Fits the L7's and some S19's (Fan emulator with older style rectangle connector)

· 60mm - Fits most S19's and S19 XP’s (J's, Pros etc...) (Fan emulator with older style rectangle connector)

· 90mm - Fits the DR7, HS3's, KA3's, Some S19 XP's, K7's, & The NEW Bitmain KS3 (Fan emulator with older style rectangle connector)

· 180mm- Only Fits the E9 (Fan emulator with older style rectangle connector)

· 210mm - Only Fits the E9 Pro's (Fan emulator with older style rectangle connector)

· Special S19K/S19K Pro - This is a 60mm Kit with Special Fan Emulators for the new S19k's/Pro (Fan emulator rectangle and square connector)

· Special S21- This is a 60mm Kit with Special Fan Emulators for the new S21’s  (Fan Emulator New Style Square Connector)

· S21 XP/Pro/Plus(Require AC Infinity Pro s10 Fan)- This kit  fits the s21 xp/ pro and plus. (Fan Emulator New Style Square Connector)

 

· Special KS5 and KS5 Pro- This is a 90mm Kit with Special Fan Emulators for the new KS5/Pro (Fan Emulator New Style Square Connector)

· L9/L11- This is a 60mm Kit with Special Fan Emulators for the new L9/L11 (Fan Emulator New Style Square Connector)

· Z15 Pro- Z15 Pro kit (Fan Emulator New Style Square Connector)

· X5- X5 kit (Fan Emulator Old Style Rectangular Connector)

 

 

 

Please see the listing images to determine the proper kit needed

What is included in the kit?

1.       One -  8in  or 10in(for s21 XP, Pro, Plus) Inlet adaptor with one selected PSU Manifold (Connects directly to the Duct Fan Blower and your ASIC)

2.       One - 8" Outlet adaptor with PSU Cooling (Connects to the Discharge Side of your ASIC and Discharges the hot air to a 8" hose). Has Gasket to make sure all heat is exhausted through 8in port.

3.       12 - M8 x 10mm Stainless Steel Screws (To mount both adaptors where the original fans mounted) MUST USE TO INSTALL KIT. ORIGINAL FAN SCREW ARE TOO LONG AND WILL DAMAGE ASIC.

4.       Four - 4 Pin (Inline) Fan Emulators (Plugs in where the original fans did)

5.       Installation Instructions

6.       Free Shipping!!!!! (on Orders shipped to the USA)

 

 

PLEASE FEEL FREE TO REACH OUT WITH ANY QUESTIONS OR HELP NEEDED. I WILL DO MY BEST TO RESOLVE ANY ISSUES QUICKLY.