Product Advantages:
High brightness
High temperature resistant
High purity of luminescence
Good stable performance
Easy installation, just plug & play
Energy saving environmental
 
Product description:
Bulb Socket: H4 9003+H11 H8
Power:60W/55W H4 , 55W H11
Lumen:4000LM/Pair, 2000LM/Bulb
Operating voltage:12V
Beam Angle:360°
Color Temperature: 5000K Warm White
Lifespan:over 50000 hours
Working Temperature:-40-+80 Centigrade
Waterproof rate:IP68
Canbus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
 

Attention:

  • Do not directly touch the bulbs glass with bare hands, it may shorten the life and affect the light bulbs temperature.
  • Please take note to make sure the bulbs must fit on the vehicle either on Low Beam / High Beam, or Fog Light.
 
Package Includes:
New and old packaging will be shipped randomly
 
Note:
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
For most cars, just Plug-n-Play,no ballast required. Yet for some European vehicles or new vehicles, load resistors maybe required to avoid the error code or blinking.
When installing this bulb, please make sure to turn the car off, and key out.
bulbs are very easy to install. You just have to plug it in the socket. ( bulb has + AND -terminal. If it doesn't light up after inserting into the socket, all you need to do is insert it oppositely.)
 
The compatible vehicle list shows only partial cars due to the ebay limits, if your car plug is same with this bulb, the item will fit your car.
If you're not sure about it, please send us an ebay message and tell us your car year, make, model and the position you need to replace, we will help you check with it.
 
 
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
 

Contact Us:

◆Thank you for purchasing our product!

◆Dear customer, if you have any inquiries, quality problems or inappropriate or other problems about our products, please do not open a return dispute or return application or bad evaluation directly, contact us through eBay information, we will give you a satisfactory solution .

◆We try to reply to your email within 24 hours, but due to the large volume of emails received every day and different time zones, we may not be able to respond to your email immediately. Hope your understanding, thank you.

DataCaciques