85mm 120kph GPS Speedometer for Car Marine with Left Right and High Beam Red LED
Features:
Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments.
Function: instrument with stepper motor pointer, with polarity protection,with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration.
Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments.
Function: instrument with stepper motor pointer, with polarity protection,with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration.
Specifications:
Operating temperature: -40°C ~+85°C
rotection rank: IP67
Indicating range: 0-120 km/h
Operating voltage: 9-32VDC
Fixing dimension: 85mm
Style: stainless steel plate
Background color: black
Backlight : red
Item weight: 330g
Operating temperature: -40°C ~+85°C
rotection rank: IP67
Indicating range: 0-120 km/h
Operating voltage: 9-32VDC
Fixing dimension: 85mm
Style: stainless steel plate
Background color: black
Backlight : red
Item weight: 330g
This speedometer with left right turn signal and high beam
Installation instructions:
1.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 85mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 85mm of the instrument panel at the back of the instrument.
2.After the instrument is mounted in the panel,Screw down with a fixed ring.
3.Connect the wire,the instrument housing is directly connected to the 12/24V power supply.
4.Insert wire harness,Firmly locked in the table.
Wiring Harness:
Red---9+32VDC
Orange---Backlight(+)
Black---Ground(-)
White---High Beam(+12V)
Yellow---Right Turning Signal (+12V)
Grey---Left Turning Signal(+12V)
Package Included:
* Speedometer
* Cable
* GPS Receiver
* Installation instruction
* Installation instruction
