Feature:
[Safe for all vehicles] ANCEL automotive smoke machine leak detector is made of thick solid metal, compact and durable.
ANCEL
smoke machine heats up the baby oil or mineral oil to produce smoke vapor. This vapor does not have any toxic particles which could cause harm to the body. It's entirely safe for all vehicles.
[Ideal for checking all types of leaks] ANCEL S3000 evap smoke machine comes with various tapered smoke injection nozzles, which can fit in almost all lines and hoses and an detect even the smallest leaks. You can test connectors, seals, gaskets, worn rubber, exhaust or cooling systems, intake manifolds, low-pressure Turbo leaks, vacuum leaks, and EVAP systems. Therefore, It's perfect for checking all types of leaks.
[Save you time and money ] A vehicle may run into a problem at any moment and anywhere. ANCEL S3000 automotive smoke machine will make it easy for you to detect both vacuum and EVAP leaks. Get S3000 car smoke machine and solve the problem by yourself, You'll save time and money and learn a new skill.
[Easy-to-use automotive smoke machine] The operation to test for leaks is almost straightforward. after putting the desired EVAP smoke machine fluid, fasten the power cable and connect the air supply to check the leaks. ANCEL S3000 has a hanging on vehicle hoods. ANCEL S3000 automotive smoke machine features a flow meter,which is easy to read, enabling you to estimate the size of a leak.
【Overheat & Anti-frost Protection】This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device
How to do leakage test？
1. Turn OFF the ignition of the vehicle.
LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF
2.Dismantle the air filter and the throttle connections.
3.Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake
Adapter into the opening
4.Connect the Power Cord to 12V vehicle battery.
5.Now the Power LED would be ON, if else check the power supply.
6.Introduce the smoke nozzle into the system via the Adapter Cone
7.Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter
8.Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle
9.The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist
10.After test, press Smoke Control Switch again to stop the unit from generating smoke and
press Air Control Switch to stop generating pressurized air
11.Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.
ANCEL S3000/2000/1000 ADVANCED TECHNOLOGY
Intake System Test,Exhaust Systems Test,Crankcase system test,Car Sealing Test,Fuel Tank System Test,Turbo System Test,Various Pipe Fittings Test.
ANCEL S3000 Car Smoke Leak Detector Support All of Car Models
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles,ATVS,light trucks and speedboats,Suitable for all car models
Independent Switch Control Design
AIR MODE----independently controlled built-in air pump
SMOKE MODE---independently controlled smoke generator
ANCEL S3000 Car Leak Detector Status Indication
OVERHEAT & ANTI-FROST PROTECTION
Overheat Protection:When the temperature of the device exceeds 75℃,power protection will be intelligently activated to turn it off.
Anti-frost Protection:The device can also work normally at -20℃
Note:
1.When you use this ANCEL S3000 Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range.
2.The testing liquid : both liquid paraffin and baby oil are OK.
3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5.During the process of leak detection, please keep away from smoke-sensitive parts.
6.Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7.The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8.The round part of this detector has temperature, please be careful to avoid burns.
9.If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
Smoke Leak Detector ANCEL S3000/2000/1000
***Oil Refifill Port: For oil refifill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit
***Velcro Strap For collection of the smoke delivery hose, and power cord before storage.
***Smoke Outlet Port :While set up the unit, the Smoke Delivery Hose need to be mounted onto the Smoke Outlet .
***Power Socket: While set up the unit, the power cords need to plug into the power socket.
***State Indication and Air Control:The LED Indication has two states. RED: Power ON. GREEN: Pressurized air production. While power up the unit, the LED would turn RED. Press Air Control switch, the LED Indication would turn GREEN, and the unit start to generate pressurized air. Press Air Control switch again anytime, the LED Indication would turn RED, and the unit stops generating pressurized air.
***State Indication and Smoke Control:The LED Indication has three states. OFF: Smoke generation not started. GREEN: Smoke generation. RED: Overheat. While not smoke the unit, the LED would be OFF. Press Smoke Control switch, the LED Indication would turn GREEN, and the unit start to generate smoke. Press Smoke Control switch again anyitme, the above LED Indication would turn OFF,and the unit stops generating smoke. While the smoke generating chamber is overheat, for protection, the smoke generation would be halted and the LED Indication would turn RED and restart generating smoke while the smoke generating chamber cooled down, or you can switch it OFF by pressing Smoke Control switch.
***System Pressure Gauge: The Pressure Gauge displays the output pressure of the machine if block the smoke outlet port, otherwise it shows the real time pressure of the system been testing.
***Flow Meter: The purpose of the flow meter is to provide a quick visual indication of the amount of air/smoke passing through the system being tested. If the smoke nozzle is in a closed system, and there are no leaks in that system, the flow meter will read zero (ball at bottom of scale). As the system is filled with air or smoke, the ball in the flow meter will slowly fall to the bottom of the scale as the pressure in the system equalizes to the output pressure of the unit. As the flow decreases, the output pressure will increase. If the flow meter ball never falls to the bottom of the scale, there is leakage or air passing through the system. It is not necessary to use smoke when using the flow meter to determine if a leak exists.
***Flow Dial: In many cases excessive smoke existing a leak may make it difficult to determine the exact location of the leak. The purpose of the Flow Control Valve is to decrease the amount of smoke existing a leak so that its position may be pinpointed without the masking effect of excessive smoke. Turn clockwise to decrease flow, counterclockwise to increase flow. This valve is also used to lock out the system under test and observe any pressure decay on the pressure gauge.
***Oil Level Gauge: While set up the unit, smoke oil need to be filled into the unit, do not exceed the MAX line. Check and confirm proper oil level periodically. If the oil level is lower than the MIN line,the unit would need a refill.
Product Parameter
Power Supply: DC12V
Output pressure: 0.5~0.8 bar
Air pressure output: built-in air pump
Main unit dimensions:85×130×185mm
Length of Power Cord: 2.5 Meters
Length of Smoke Hose: 2.5 Meters
ANCEL S3000 Packing List
1*Power Cord: To offffer connection from the unit to the automobile battery, in order to drive the unit.
1*Funnel: Assistance method for smoke oil refifill, to prevent pour oil to the unit surface.
1*Hook up: To hang the somke machine in the car
1*User Manual: Detailed descriptions about how to use the smoke machine automotive.
1*Intake Bladder: To fifit the intake and exhaust, seal the system and introduce smoke into the system. Especially while the inlet position is not rounded-shape.
1*Adapter Cone: To fifit the intake and exhaust, seal the system and introduce smoke into the system. It may fall out at high pressure and need a second hand to push and hold at operation.
1*Replacement Rubber: The rubber on the Intake Bladder may be easily broken, if not operate it properly with caution.The rubber could be replaced with new one without replace the whole Intake Bladder.
1*Smoke Delivery Hose: For introduction of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the vacuum pipe directly.
ANCEL S300/200/100 Smoke Machine Automotive EVAP Leak Detector Tester with Built-in Air Pump - Dual Mode Fuel Pipe Vacuum Leak Diagnostic Test Tool for Cars, Motorcycles, Trucks, Boats, ATV and More......
ANCEL S100/S200/S300 FULL SYSTEM DIAGNOSTICS, DON'T MISS ANY LEAKS.
EVAP SYSTEM TEST: Leakage in the fuel evaporation system causes fuel vapour to escape into the atmosphere, resulting in waste and pollution or unstable engine idling.
EXHAUST SYSTEM TEST: Uncleaned harmful gases escaping into the atmosphere or increasing the noise of the vehicle are the main disadvantage when leaks occur in the exhaust.
FUEL TANK SYSTEM TEST: If there are gaps in the fuel tank and pipes caused by improper installation or insufficient sealing of the fuel tank cap, it may cause leaks in the fuel tank system.
TEST OF VARIOUS PIPE CONNECTIONS: Smoke test of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
CAR SEALING TEST: Poor sealing of the car can lead to many inconveniences, such as it is not warm and dusty, not soundproof, not waterproof, etc.
CRANKCASE SYSTEM TEST: Excessive pressure or corrosion of the crankcase is the main reason why the crankcase seal is damaged and oil leaks.
INTAKE SYSTEM TEST: A leak in the intake system will result in inadequate intake of the car engine, leading to low engine performance.
TURBO TEST: The leakage of coolant would cause the engine to indicate a high water temperature.
How to do leakage test?
Step 1: Fill in 10ml-20ml test oil (baby oil) to the detector
Step 2: Connect the delivery house to the detector
Step 3: Disconnect the pipe that needs to be connect with the detector
Step 4: Connect detector with DC12V battery,device starts to work
Step 5: The pipe will be filled with smoke,check the leak points
ANCEL S100/S200/S300 ADVANCED TECHNOLOGY
Intake System Test,Exhaust Systems Test,Crankcase system test,Car Sealing Test,Fuel Tank System Test,Turbo System Test,Various Pipe Fittings Test.
ANCEL S100/S200/S300 Car Smoke Leak Detector Support All of Car Models
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles,ATVS,light trucks and speedboats,Suitable for all car models
OVERHEAT & ANTI-FROST PROTECTION
Overheat Protection:When the temperature of the device exceeds 75℃,power protection will be intelligently activated to turn it off.
Anti-frost Protection:The device can also work normally at -20℃
Smoke Leak Detector ANCEL S100
Output pressure:0.5PSI
Output Volume:<8LPM
Power Supply:DC12V
Current:5AMP
Product Packing List
1pc * ANCEL S100 Car Smoke Leak Detector Main Unit
1pc * Power Cord
1pc * Hook up
2pc * EVAP Kit
1pc * Smoke Delivery Hose
1pc *Air Adpt
ANCEL S300 Package List
ANCEL L3000 Package List
L3000 Car Smoke Leak Detector EVAP Smoke Machine Diagnostic Tool Car Fuel Pipe Leak Detector Tester Auto Vacuum Tester
With ANCEL L3000 EVAP smoke machine, you can greatly reduce the troubleshooting duration for vacuum leaks and other problems.
Smoke coming out of the electrical or engine components is always a bad sign, especially when it’s detected in your car, as there're lots of components in a car system, it is very difficult to accurately diagnose the root cause of the problem, There’s nothing more frustrating than trying to track down a pesky vacuum leak without the right tools. You don’t want to spend a ton of money on a mechanic. thus, ANCEL L3000 Automotive Smoke Machine is one of the most useful diagnostic tools you must have to detect the leaks.
What ANCEL L3000 EVAP Smoke Machine Leak Tester Can Do for You?
🚩Built-in Air Pump Saves Time and Money:
ANCEL L3000 smoke machine automotive comes with tons of accessories that allow you to use it on just about any vehicle, unlike other EVAP smoke machines that you’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, ANCEL L3000 smoke machine automotive already has that feature built-in. So you’re saving some extra money!
🚩 Dual Testing Model:
ANCEL L3000 EVAP smoke machine come with a dual testing model including air mode and the smoke mode. Air Mode:Independent controlled built-air pump. Smoke Mode: Independent controlled smoke generator. These enable you detect the leaks precisely.
🚩 Instant Smoke Generation:
Press Smoke Control switch, the LED Indication would turn GREEN, and the car smoke tester start to generate smoke within seconds. One of the biggest hassles with the automotive smoke machines is the time of heating of the device. You won’t have to wait for the tester to warm up with ANCEL L3000 smoke machine automotive.
🚩 Overload Protection:
ANCEL L3000 automotive smoke machine leak detector has built in self-protective system:Overheat and Anti-frost Protection. When the temperature of the device exceeds 120℃, power protection will be intelligently activated to turn it off. The device can also work normally at -20℃. You don’t have to worry about switching on and off the machine constantly during diagnosis. The system takes care of the load for you.
🚩 Wide Compatibility:
ANCEL L3000 smoke machine automotive used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. The smoke machine automotive is suitable for all makes and models of cars.
🚩 Various System Test:
Crankcase System Test; Intake System Test; Car Sealing Test; Fuel Tank System Test; Turbo System Test; EVAP System Test; Exhaust System Test; Various Pipe Fittings Test. (Note: Not applicable to air conditioning system piping, Lamp housing) It can quick to find evap leaks.
🚩 Save Money by Using Baby Oil or Mineral Oil:
You don't need to buy expensive smoke oil. Use baby oil, Pure #5 white oil is the best choice if available. This makes ANCEL L3000 smoke machine automotive practically free to use forever!
🚩 Easy To Use:
The Smoke Machine Automotive with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system, dramatically reducing diagnostic time.
Full System Diagnostics, Don't Miss Any Leaks.
▶Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
▶Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
▶Car Sealing Test: poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.
▶Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough
▶Turbo Test: the leakage of coolant would cause the engine to report high water temperature.
▶Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses.
▶EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling
▶Exhaust System Test: Uncleaned harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
Smoke Machine Leak Status Indication
Quick vehicle leak diagnosis by pressure display
📌 NO Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system.
📌 Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.
📌Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.
Overheat & Anti-Frost Protection
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehicles, ATVS,light trucks and speedboats,Suitable for all car models.
● Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.
● Anti-frost Protection
The device can also work normally at -20℃.
Independent Switch Control Design
Air mode: Independent controlled built-air pump.
Smoke mode: Independent controlled smoke generator.
Viewable Pressure Gauge
The Automotive EVAP Smoke Machine equipped with a liquid filled pressure gauge. By observing the change of pressure gauge, the leakge situation is clear at a glance.
Adjustable Air Flow
Output Flow: <6 L/min
Air flow meter with adjustable button, easy to control the smoke effect.
Fast Smoke Output
This machine built-in air compressor, with superior wick and heating element. It can produce smoke instantly by heating up USP mineral oil or baby oil. 4ft Smoke Outlet Pipe can help reach and connect perfectly.
Wide Range of Applications
Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault.
How to Use the Automotive Fuel Smoke Leak Detector?
Notice before Leak Test: Turn OFF the Ignition of Your Vehicle
● Assemble the smoke machine with delivery hose, power socket and hook.
● Unscrew the oil filler cap and add test oil.(Pure #5 white oil is the best choice if available)
● Disconnect the pipes that need to be connected with the smoke leak detector.
● Connect your car smoke machine’s power cord to 12V vehicle battery (red clip to battery positive and black clip to a good ground, then the Power LED would be ON, if else check the power supply)
● Introduce the smoke delivery hose into the pipeline to be tested via the Adapter Cone.
● Press Air Control Switch, wait for seconds until the system is pressurized, check the Pressure Gauge & Flow Meter reading for leak status. Turn on the smoke generator, adjust the smoke amount to suitable amount so you can locate the leak position quickly.
● The leak can be judged according to where the smoke appears.
ANCEL L3000 smoke machine automotive Parameter
● Output pressure:7-12 PSI
● Output flow:＜6L/min
● Power supply: DC12V,vehicle battery
● Air source: built-in
● Test oil capacity:10ml-20ml
● Material:Iron
● Length of Power Cord: 2.5Meters
● Length of Smoke Hose: 2.5Meters
● Test Oil:Mineral Oil or Baby Oil(oil not include)
● Multi Protections:Oil Outlet, Over-Heat and Over-Load Protection
● Machine Size:13cm x 8.5cm x 18.5cm
● Package Weight: 2.3kg/5 lb
● Oil Refill Port: For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit.
● Velcro Strap For collection of the smoke delivery hose, and power cord before storage.
● Pressure Gauge: Displays the output pressure of the machine or show the real time pressure of the system been testing.
● Air Flow Meter: Provide a quick visual indication of the amount of air/smoke passing through the system being tested.
● Flow Dial: Easy to control the smoke and air amount, determine the exact location of the leak easily and quickly
● Oil Level Gauge: Allow you to accurately control the test oil volume.
Smoke Control: After pressing this switch, the power indicator light is on to indicate that the power supply is normal.
● Air Control: Press the AIR MODE, pump starts working, only after this, you may press and start the SMOKE MODE.
On Jul 9, 2025 at 03:00:49 PDT, seller added the following information: