NOTE:
Due to compatible List can not show up all Car model. Please check the Correct bulb size and plug type of your vechicle, or you can tell us your car make, model, year and other information, our customer service will help to check which bulbs you need.Thank you!
Due to compatible List can not show up all Car model. Please check the Correct bulb size and plug type of your vechicle, or you can tell us your car make, model, year and other information, our customer service will help to check which bulbs you need.Thank you!
Features:
-
300% Brighter than Halogen: 50W 6300K cool white, 1w=100lm, with clear visibility and perfect beam pattern, so you can enjoy good vision while driving at night.
-
Super Focused Beam Pattern:our bulbs with 1.0mm ultra-thin centered light emitting. No dark spots or foggy light, do not blind oncoming traffic.
-
10mins Easy Installation: The bulb’s almost 1:1 design as halogen. Plug and play. No other tools are needed.
-
360° Adjustable Beam Pattern: Adopts 360° adjustable locker ring to ensure the best beam pattern.
-
50,000 hours Lifespan: internal comes with a copper base board, cold pressed aluminum heat sink and 12,000rmp cooling fan. Better solve the dimming or over heated of bulbs.
-
Package Included: 2pcs 9007 Bulbs.
NOTE:Our bulbs replaces halogen bulbs ONLY. It does not replace HID .
Specifications:
- Plug Type: 9007, High-Low Beam
- Power: 50W/bulb
- Luminous Flux: 10000LM/set(5000LM/bulb)
- Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
- Color Temperature: 6000K White
- Beam Angle: 360°
- Operating Temperature: -40 ~ +80°C
- Lifespan: >50000 hours
- Number of Bulbs: 2
- To Fit: High + Low Beam Head Lights KIt
- Placement on Vehicle: Left,Right,Front
- Warranty: 5 year warranty
- Application: Headlight,Fog light (High + Low Beam Head Lights )
Package Content:
- 2x 9007 HeadLights Bulbs
- Comes with Retail Box
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.