E6000 Glue 

14.7ml / 29ml / 59.1ml / 109.4ml  

Follow these step-by-step directions when using E6000:

14.7ml dont come with nozzle its to small to add nozzle thank you 

Please Note : this comes with FREE Nozzle 

1. Please read all directions and test small area before use.

2. Surface should be clean, dry, and free from dirt. For best results, lightly roughen surface before use.

3. Screw precision tip into top of tube cap. Replace with fresh tip as needed.

4. Apply directly to surfaces to be bonded or repaired. Allow 24 hours for curing—Maximum bond strength may not be reached for up to 72 hours.

5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents.