First Template

Swinging Arm Cradle Assembly with Eight Non Marking Wobble Rollers

Non-marking wobble rollers on high quality Aluminium wing brackets fitted on heavy duty galvanised equalisers, all on a fully galvanised swinging arm complete with hangers.

Rollers have nylon centres and PVC outers and are free rolling under load (unlike rubber ones) allowing the easiest launch and recovery whilst not marking the hull.

This assembly fits all braked Extreme trailers, all Indespension Roller Coaster Trailers and any other make with an inside width (see image) chassis members.

Hangers to suit box section of 60mm x 40mm or 80mm x 40mm (Height and width of trailer chassis) 

Using this type of swinging roller assembly will ensure easy launch and recovery and will allow full 'Drive-on/off' capability if using two of them.

Equalisers have two different height settings and are 'U bolted onto the swinging arm for full adjustment.

Comes complete with all fixings ready to bolt on.




 

Delivery Information

Shipping is free to all UK addresses excluding the following (Please email for prices):

Please note: The Channel Islands are classified as an International destination.

The Highlands and Islands of Scotland - postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE,

Northern Ireland, Isle of Man and Isles of Scilly - postcodes BT, IM, TR21-25

Please note: The Channel Islands are classified as an International destination.

Returns information

In the event of any warranty claim please contact us first to discuss the problem on 02380632535. If for any reason within 30 days you no longer require your item(s) you can return them at your own cost, the item(s) must be unused and in the original undamaged packaging.

Non-marking wobble rollers on high quality Aluminium wing brackets fitted on heavy duty galvanised equalisers, all on a fully galvanised swinging arm complete with hangers.

Rollers have nylon centres and PVC outers and are free rolling under load (unlike rubber ones) allowing the easiest launch and recovery whilst not marking the hull.

This assembly fits all braked Extreme trailers, all Indespension Roller Coaster Trailers and any other make with an inside width (see image) chassis members.

Hangers to suit box section of 60mm x 40mm or 80mm x 40mm (Height and width of trailer chassis) 

Using this type of swinging roller assembly will ensure easy launch and recovery and will allow full 'Drive-on/off' capability if using two of them.

Equalisers have two different height settings and are 'U bolted onto the swinging arm for full adjustment.

Comes complete with all fixings ready to bolt on.