1.5-3″ 38.1-76.2mm Outer Diameter Stainless Steel 1.5D Mandrel Bend. 

Mandrel bent tubing produced in house with High Quality Tooling to create consistent bends; A must for building the very Best Exhaust Systems. 

With a bend accuracy of +/- 0.5%, a cold saw cut finish on both ends and perfectly clean inside and out - These bends are ready to work with as soon as they arrive. 

1.5mm wall thickness

1.5D CLR

Leg lengths

1.5" - 115mm

1 5/8" - 115mm

1.75" - 115mm

1 7/8" - 115mm

2" - 125mm

2.25" - 143mm

2.5" - 160mm

2.75" - 175mm

3" - 190mm

Long Leg Bends

1.75" Long Leg 180° - 215mm Leg Lengths

1 7/8" Long Leg 180° - 215mm Leg Lengths

2" Long Leg 180° - 250mm Leg Lengths

2.5" Long Leg 90° - 1 x 160mm Leg, 1 x 400mm Leg

2.5" Long Leg x 2 90° - 250mm Leg Lengths

2.5" Long Leg 180° - 360mm Leg Lengths

Short Bend

1.5" 20° Short Leg - One leg 80mm Long and the other 110mm long

1 5/8" 20° Short Leg - One leg 80mm long and the other 115mm long

1.75" 20° Short Leg - One Leg 80mm and the other 115mm long

1 7/8" 20° Short Leg - One leg 75mm long and the other 115mm long

2" 20° Short Leg - One leg 80mm long and the other 125mm long

Centre Line Radii 1.5D

1.5" - 57.15mm

1 5/8" - 61.92mm

1.75" - 66.75mm

1 7/8" - 71.4mm

2" - 76.2mm

2.25" - 85.8mm

2.5" - 95.25mm

2.75" - 105mm

3" - 114.3mm

Random offcut is a small piece of 304 stainless, for testing purposes.
These will be randomly selected, and requests for certain sizes cannot be met.

Custom Leg Lengths are not available. All items will be shipped as described regardless of requests.