Insert Information
Manufacturer	SANDVIK
Insert Code	DCGT 11 T3 04-UM
ANSI Code	DCGT 3 (2.5) 1-UM
Insert Grade	H13A
Grade ISO Range	S15 (S10-S30) - K20 (K10-K30) - N15 (N05-N25)
Insert Material Type	Uncoated Carbide
Grade Description	S - Uncoated carbide grade which combines good abrasive wear resistance and toughness for medium to rough turning of Heat Resistant and Super Alloys at low to moderate speeds. K - Uncoated carbide which combines good abrasive wear resistance and toughness for moderate to low speeds and high feeds in Cast Iron. N - Uncoated carbide grade. Combines good abrasive wear resistance and toughness for medium to rough turning of Aluminum Alloys.
Geometry Information	UM is a positive geometry which generates low cutting forces. The positive wave along the edge guides the chip away from the workpiece. It features a broad chip breaking area for different materials and mixed material machining. A good general purpose medium type geometry. A geometry designed for Steel but also for use in Stainless Steel, Cast Iron and HRSA. DCGT inserts have the same dimensions as DCMT inserts and fit the same tools. The difference is that they are made to a tighter tolerance.
Quantity Supplied	1 Pack of 10 Inserts.
Condition	The Inserts are New/Unused but the Boxes are Unsealed.
DISCLAIMER
The technical information provided in this listing is for general guidance only and has been taken from literature provided by manufacturers. Every reasonable care has been taken to ensure this information is accurate and correct and we do not accept any responsibility or liability for errors or omissions or any information that is found to be misleading. For more detailed technical information and to check this information please consult the manufacturers own literature or websites which in general have an extensive array of technical literature available.