1.Fitting the Following vehicle:

2008-2013 Nissan Rogue

2.Package Includes:

1x Part # Front Control Arm - K621452
1x Part # Front Control Arm - K621453
1x Part # Stabilizer Bar Link- K750094
1x Part # Stabilizer Bar Link - K750095

Features

Type:Control Arm & Ball Joint Assembly

Interchange Part Number:K621452,K621453,K750094,K750095

Location:Left+Right+Front+Lower

Professional Installation is Highly Recommended

NOTES:

1.Please carefully check whether the product matches the model before purchasing.Please check above compatibility list to make sure it fits your vehicle.

2.Take note of some of the things that go into product installation.

3.After the buyer purchases, we will send the goods within a short time, so that the buyer can receive satisfactory goods as soon as possible.

4.eBay only allow one tracking number uploaded for one order. you might not get the shipping information in time,Therefore, when you don't get your order completely, please don't worry, and contact me first by eBay message. We will check the situation and respond to you as soon as possible.

Control Arm

Conditions under which the control arm needs to be replaced:

(1)Noise (squeak, crunch, rumble).

(2)Deteriorating driving performance.

(3)Turn increasingly blurred and imprecise.

(4)Uneven tire wear.

Installation site:

The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward.

Function:

The control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses.

Sway bar

The condition that the Sway bar needs to be replaced:

While driving, the following signs may indicate a faulty sway bar stabilizer link:

(1)Rattling and thumping noises on rough roads.

(2)Imprecise vehicle handling.

(3)Stronger inclination of the vehicle during cornering.

Function and effect:

Sway bars transmits the torsional force between the body and the chassis to the stabilizer of a particular axle. Depending on the design of the front or rear axle, they form the necessary connection for optimal interaction between the wheel guide and the stabilizer. The body roll of the vehicle in the turn is minimal to ensure safe road holding. When the vehicle is in fast turns or in irregular road situations help reduce body roll, while achieving balanced handling and limiting body roll in corners to improve tire adhesion. Simply put, when the car turns at high speed or drives on the uneven road surface, it will be a little twisted, and it is easy to tilt, causing the vehicle to roll over. The function of the balance bar is to improve the stability of the body when turning, so that the car will not tilt excessively.