PDT-PEX-7205-MP-SF-I
1 Port 10/100/1000 95W PoE to 4 Port Industrial PoE+ Extender
The PDT-PEX-7205-MP-SF-I is a hardened Gigabit Ethernet PoE Extender/ Unmanaged Switch which facilitates connectivity for IEEE 802.3 af/at devices, such as cameras, access points, and other PoE devices, up to a range of 100m from the device, and in locations where there is no power source available.
The device is powered from a remote power source with PoE+/++ capability (IEEE 802.3at/bt), and this can be extended, in a daisy Access Ports which are IEEE802.3af/at compatible (max total PoE load 75W) and has one 10/100/1000 RJ45 Port which receives the data and power feed from the host device.
In addition, the device can be powered via a 48~57VDC Power Supply, effectively providing a power redundancy topology.
Units can be arranged in a daisy chain configuration to extend the effective range of your network.
It is housed in a ruggedized aluminium casing, and has wide operating temperature range, making it suitable for the harshest of networking environments.
All documentation including Datasheet, Manual, and Declaration of Conformity is available to download on the main website.
Features:
The following items are included in the shipping carton:
| ETHERNET | ||
| Standards | IEEE 802.3 Ethernet | |
| IEEE 802.3u Fast Ethernet | ||
| IEEE 802.3ab Gigabit Ethernet | ||
| IEEE 802.3x Full Duplex Flow Control | ||
| IEEE 802.3az Energy Efficient Ethernet | ||
| IEEE 802.3af Power over Ethernet | ||
| IEEE 802.3at Power over Ethernet Plus | ||
| IEEE 802.3bt Power over Ethernet Plus Plus | ||
| Forwarding and Filtering Rate | 14,880pps (10Mbps) | |
| 148,800pps (100Mbps) | ||
| 1,488,000pps (1000Mbps) | ||
| Packet Buffer | 2Mbits | |
| Packet Length | 10KB | |
| MAC Address Table | 4K | |
| Switch Fabric | 14Gbps non-blocking | |
| Exchange Property | Backplane Bandwidth 14Gbps | |
| Packet Forwarding Rate 14.88Mbps | ||
| INTERFACE | ||
| Power & Data | 1 x RJ45 Power & Data Input (IEEE 802.3at/bt) 4 x RJ45 Power & Data Output (IEEE 802.3af/at) 2 x SFP Slot | |
| Transmission Distance | 100m | |
| POE | ||
| Standard | IEEE 802.3af/ IEEE 802.3at/ IEEE 802.3bt | |
| Port | RJ45 | |
| Pin Assignment | 4/5 (+) 7/8 (-) | |
| Power Budget | Up to 71W total | |
| Max 30W on one channel | ||
| ENVIRONMENTAL | ||
| Operating Temperature | -40°C to +80°C | |
| Storage Temperature | -40°C to +85°C | |
| Relative Humidity | 5% - 95% non-condensing | |
| MTBF | 200,000 hours | |
| ELECTRICAL | ||
| PoE Powered | +48~57VDC via PoE (IEEE 802.3bt) | |
| Optional DC Powered | +48~57VDC via Terminal Block | |
| Power Redundancy | Highest Input Primary | |
| Power Consumption | 5w without PoE Devices Attached | |
| Short-Circuit Protection | Auto-Reset | |
| Reverse Polarity | Protected | |
| MECHANICAL | ||
| Dimensions | 95mm x 88mm x 46mm | |
| Weight | 300g | |
| Casing | Aluminium | |
| Mounting | DIN Rail | |
| INDICATORS | ||
| PWR | Power Status | |
| L/A | Link Activity | |
| PoE | PoE Power Output Status | |
| FX1/2 | Fiber Status | |
| FIBER CABLES | ||
| 1000 BASE-SX | 50/125um or 62.5/125um - 220/55/2000m | |
| 1000 BASE-LX | 9/125um SM 2-120km SFP Modules | |
| 100 BASE-FX | 50/125um or 62.5/125um MM up to 2km SFP | |
| 9/125um SM 20-120km SFP Modules | ||
| CERTIFICATION | ||
| Electrical Safety | EN 62368-1:2020+A11:2020 | |
| Emissions | EN 55032:2015+A1:2020 | |
| Radiated Immunity | EN 55035:2017+A1:2020 | |
| Harmonic Emissions | EN 61000-3-2:2014 | |
| Fluctuations and Flicker | EN 61000-3-3:2013 | |
| Electro-Static Discharge | EN 61000-4-2:2009 | |
| Electromagnetic Field Immunity | EN 61000-4-3:2010 | |
| Electrical Fast-Transients | EN 61000-4-4:2012 | |
| Surge | EN 61000-4-5:2014+A1:2017 | |
| Conducted Immunity | EN 61000-4-6:2014 | |
| Power Frequency Magnetic Field | EN 61000-4-8:2010 | |
| RoHS | IEC 63000:2018 |